KAN-therm press elbow with bracket 16x2 300 mm K-901801

KAN-therm press elbow with bracket 16x2 300 mm (model K-901801) is a 90° press-fit pipe fitting for 16x2 mm systems. The elbow has a 300 mm leg length and an integrated mounting bracket to secure the fitting to walls or supporting structures. It is designed for hydraulic and heating installations where a compact, bracketed turn is required and where press connections are preferred for fast, leak-resistant assembly.

Advantages

The integrated bracket simplifies installation by providing a ready mounting point that reduces additional fixing work. Press connection ends deliver uniform joints without solder or threaded sealing, reducing installation time and the risk of leaks. The 90° geometry with a 300 mm leg length allows accurate alignment and stable attachment in confined or exposed routes. The fitting is produced for use with 16x2 mm press systems, ensuring dimensional compatibility and secure mechanical joint performance.

Suitable for

• Domestic and commercial heating systems
• Hydraulic installations requiring angled direction change
• Pipe runs where a fixed bracketed elbow is needed for support
• Projects using press-fit installation methods for faster assembly

Key specifications

• Angle: 90°
• Nominal pipe size: 16 x 2 mm
• Leg length: 300 mm
• Connection type: press-fit ends
• Integrated mounting bracket for secure attachment

How to use

Prepare the 16x2 mm piping by cutting square and deburring the pipe ends. Slide the press sleeve over the pipe and insert the pipe fully into the elbow until it reaches the stop. Position the integrated bracket against the mounting surface and secure the bracket using appropriate fasteners for the substrate. Use a certified press tool with the correct jaw for 16 mm press fittings and perform the press operation according to the tool and fitting manufacturer instructions. Verify each joint visually and, where required, perform pressure testing of the system following applicable standards and project requirements.

Usage recommendations

Store fittings in a dry place and protect press ends from contamination prior to installation. Select appropriate fasteners for the mounting surface to ensure the bracket supports the thermal and hydraulic loads. Always use compatible press jaws and follow local regulations for pressure testing and system commissioning.