Antenna outlet (RTV-SAT) Karlik MINI 12MGS end 1.5 dB black matte

Karlik MINI 12MGS end RTV-SAT antenna outlet is a compact wall-mounted termination designed for terrestrial (TV/FM) and satellite signal lines. With 1.5 dB built-in attenuation and a black matte finish, it provides a neat end-point connection for TVs, set-top boxes and satellite receivers in homes and small apartments. The outlet is intended to finish a coaxial distribution line where no further pass-through is required.

Advantages

The unit combines a low-profile, space-saving enclosure with standardized RTV-SAT connectors, ensuring compatibility with common coaxial cables and consumer equipment. A fixed 1.5 dB attenuation helps reduce signal level when necessary to avoid overload or mismatch in compact multisource installations. The black matte housing offers discreet visual integration with modern interiors and reduces glare from ambient light.

Suitable for

• Terminating a home or apartment coaxial feed for TV and FM reception
• Connecting a satellite receiver or set-top box as the final outlet
• Small installations where a low-profile wall-mounted antenna outlet is preferred

Key specifications

• Type: end RTV-SAT antenna outlet for coaxial systems
• Attenuation: 1.5 dB (fixed)
• Finish: black matte housing
• Mounting: wall-mounted, single-gang or compatible mounting box
• Connections: standardized RTV-SAT connectors for terrestrial and satellite signals
• Application: intended as a termination point, not as a pass-through or splitter

How to use

Install the outlet at the end of the coaxial distribution line by securing the housing to a compatible wall mounting box and attaching the prepared coaxial cable conductor to the unit's connector according to standard F/IEC procedures. Connect the TV, set-top box or satellite receiver to the outlet using the appropriate coaxial patch cable. Ensure cable shielding and connector contacts are clean and mechanically secure to maintain signal quality.

Usage recommendations

Use the outlet where a defined end-point is required and a modest fixed attenuation is acceptable. Avoid using this end outlet as an intermediate distribution device. For long cable runs or weak incoming signals, verify signal levels after installation and consider an inline amplifier or different attenuation value if required.