Hurry and order now – up to 50% off!
In cart {{totalProductsCount}} item(s)
Your cart is empty
Kingston Technology KTH-PL556E-16G memory module 16 GB 1 x 16 GB DDR5 5600 MT/s 288-pin DIMM ECC
The Kingston Technology KTH-PL556E-16G is a single-module 16 GB DDR5 memory module designed for PC use. It is a 288-pin DIMM offering DDR5 performance at 5600 MT/s with ECC support and a CAS latency of 46. The module operates at 1.1 V and is intended for systems that require error-correcting memory and higher bandwidth provided by DDR5 technology.
This Kingston DDR5 16 GB module provides increased data throughput compared with previous-generation modules while maintaining data integrity through ECC functionality. With a 288-pin DIMM form factor and a 5600 MT/s transfer rate, it supports modern motherboards that accept DDR5 memory and helps reduce system memory bottlenecks. The 1.1 V operating voltage contributes to efficient power usage for compatible platforms.
Power down the PC and disconnect it from the mains before installing the module. Open the system case and locate an empty 288-pin DIMM slot on a motherboard that supports DDR5 ECC memory. Align the notch in the module with the slot key and press the module evenly into the slot until the retention clips engage. Reassemble the case, reconnect power, and boot the system. Verify that the BIOS/UEFI recognizes the 16 GB module and that ECC functionality is enabled if required by the platform.
Install this memory module in systems explicitly supporting DDR5 288-pin ECC DIMMs and consult the motherboard manual for supported memory configurations and BIOS settings. For multi-module configurations, use identical modules for optimal compatibility and performance.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}