Klimas nail-in fast-mount anchor 4.9x65 mm SM-8X60 for quick fixing

Klimas nail-in fast-mount anchor 4.9x65 mm SM-8X60 for quick fixing is a driven fixing element designed for rapid mechanical fastening of fixtures to base materials. The anchor is installed by hammering into a pre-drilled hole where its sleeve expands or grips the substrate to hold light to medium loads. The compact design and steel construction provide a space-efficient solution for repetitive installation tasks in construction and renovation.

Advantages

The anchor enables quick, repeatable installation by simple hammer driving, reducing installation time compared with threaded or chemical anchors. Its compact length and narrow diameter suit limited-space applications while still providing reliable retention for light to medium loads. The design requires minimal additional tools — a drill and hammer — making it suitable for fast on-site work.

Suitable for

• Securing light fixtures, brackets and conduits to concrete and masonry
• Temporary or permanent fastenings in renovation and fit-out projects
• Repeat installations where speed and compact anchors are required

Key specifications

• Type: driven nail-in anchor for mechanical fixing
• Nominal diameter: 4.9 mm
• Overall length: 65 mm
• Material: steel sleeve and pin (zinc-plated or corrosion-protected finish typical for this anchor type)
• Load capacity: suitable for light to medium loads in concrete and masonry (refer to project calculations for exact values)
• Installation method: hammer-driven into pre-drilled hole

How to use

Drill a hole of the correct diameter and depth into the base material according to the anchor size, clean the hole to remove dust and debris, insert the anchor until the head sits flush, then drive the pin with a hammer until the sleeve engages the substrate. Verify that the anchor is fully seated and that the fixture is held securely. For best results follow substrate-specific drilling depths and hole cleaning procedures.

Usage recommendations

Use appropriate drill bits for concrete or masonry and wear personal protective equipment while drilling and hammering. Do not use this driven anchor in hollow or weak substrates without prior suitability checks. For safety-critical or heavy-load applications choose a fixing solution with documented load ratings and follow local building codes.