Anchor plug (quick-mount) Koelner 6 x 60 mm with flange, pack of 35

Koelner quick-mount anchor plug 6 x 60 mm with flange, pack of 35, is a plastic flanged anchor designed for secure fixing in masonry and concrete. The flanged head ensures even load distribution at the surface and helps maintain correct alignment during installation. Supplied in a pack of 35, these anchors are intended for through-fixing with suitable screws to fasten light to medium loads in construction and renovation projects.

Advantages

The flanged design improves surface contact and reduces the risk of the anchor pulling through the material. Quick-mount geometry facilitates easier insertion and expansion in drilled holes, while the plastic construction provides corrosion resistance and compatibility with common screw types. Supplied in a practical pack of 35, the anchors are convenient for repeated installation tasks and small-to-medium job sites.

Suitable for

• Mounting shelves, brackets and light fixtures to masonry or concrete
• Fixing fittings and trims in renovation and finishing work
• Through-fixing items where flange support is required for alignment and load distribution

Key specifications

• Anchor material: plastic (flanged anchor)
• Designed hole diameter: 6 mm
• Anchor length: 60 mm
• Flange for surface support and alignment
• Suitable for use in masonry and concrete substrates
• Pack quantity: 35 pieces

How to use

Drill a hole of the specified diameter and depth into the masonry or concrete using an appropriate drill bit. Clean the hole from dust and debris before insertion. Insert the anchor until the flange rests on the surface, then fix the component by driving a matching screw through the item into the anchor until the required clamping force is achieved and the anchor expands securely in the substrate. Ensure the screw length is sufficient for proper engagement without bottoming out or over-tightening.

Usage recommendations

Use screws recommended for 6 mm plugs and choose screw length according to the combined thickness of the fixture and required embedment. Avoid using in hollow or weak substrates without additional support; confirm load requirements and spacing for grouped fixings when securing medium loads.