Universal wall plug and screw set Koelner/Rawlplug UNIPLUG 8×40 mm with screw 5.0×60 mm, 60 pcs

Universal wall plug and screw set Koelner/Rawlplug UNIPLUG 8×40 mm with screw 5.0×60 mm, 60 pcs is a packaged solution for general-purpose mechanical fixings in masonry, concrete and hollow materials. The set contains 60 matched plugs and screws designed to provide consistent anchoring for light structural loads, fixtures and fittings. Supplied as 12 inner packs, the combination simplifies inventory management and on-site use while ensuring compatibility between plug diameter and screw size for secure installation when used with the correct drill bit and tools.

Advantages

The UNIPLUG design offers a balanced combination of plastic expansion and grip suitable for a range of base materials, delivering repeatable holding performance for installations such as shelving, brackets and small fixtures. Matching screws are included to eliminate sizing errors and reduce installation time. The pack configuration of 60 pieces in multiple inner packs supports on-site convenience and staged consumption during projects.

Suitable for

• Anchoring shelves and light wall cabinets
• Fixing brackets, rails and curtain fittings
• Mounting electrical boxes, cable clips and conduit supports
• General repairs and maintenance in masonry, concrete and hollow blocks

Key specifications

• Plug diameter: 8 mm
• Plug length: 40 mm
• Screw diameter: 5.0 mm
• Screw length: 60 mm
• Quantity per pack: 60 pieces (12 inner packs)
• Material: plastic wall plug with metal screw

How to use

Select a drill bit that matches the plug diameter and drill a hole to the full plug depth, ensuring the hole is clean of dust and debris. Insert the UNIPLUG 8×40 mm into the prepared hole until the flange sits flush with the surface. Position the fixture and drive the 5.0×60 mm screw through the fixture into the plug, tightening until the fixture is secure without over-torquing. For hollow or fragile substrates, use appropriate drill speed and avoid excessive force during insertion to prevent damage to the base material.

Usage recommendations

Use the set for light to medium loads; verify load requirements and choose alternative heavy-duty anchors for high structural loads. Always follow substrate-specific guidelines: use a hammer-in technique for softer blocks if necessary, and ensure the screw length and plug embedment are adequate for the thickness of the fixture and base material. Wear appropriate personal protective equipment and follow local regulations for installation.