Anchor plug Koelner/Rawlplug UNIPLUG 8 x 65 mm with screw 5.0 x 80 mm, pack 50, 12 packs

UNIPLUG universal anchor plug by Koelner/Rawlplug, size 8 x 65 mm, supplied with matching 5.0 x 80 mm screws and packaged as 50 pieces per set, with 12 packs in the bundle. The product is intended for general-purpose fixing in masonry and other solid base materials. Each plastic expansion anchor is shaped to provide reliable grip in brick, concrete and stone when used with the supplied screw, enabling fastening of fixtures, fittings and light structural elements.

Advantages

The UNIPLUG system combines a standardized plastic expansion anchor with an appropriately sized screw to simplify installation and reduce the need to match components. The anchor’s geometry is designed to expand uniformly under load to increase holding power in solid substrates. Supplied in sets of 50 and grouped into 12 packs, the bundle format supports larger projects and reduces handling frequency. The combination of anchor diameter and length is suitable for common domestic and professional anchoring tasks.

Suitable for

• Fixing shelves, cabinets and light furniture to masonry walls
• Mounting electrical boxes, conduit clips and light fittings
• Attaching brackets and rails for curtains, handrails and signage
• General repair, renovation and installation tasks in brick, concrete and stone

Key specifications

• Anchor dimensions: 8 x 65 mm (diameter x length)
• Screw size supplied: 5.0 x 80 mm (diameter x length)
• Material: plastic expansion anchor with metal screw
• Pack quantity: 50 pieces per set
• Bundle: 12 packs included
• Recommended base materials: masonry, solid brick, concrete and natural stone

How to use

Drill a hole in the base material using the appropriate diameter drill bit for an 8 mm anchor. Clean the hole of dust and debris, then insert the plastic anchor flush with the surface. Position the fixture and drive the 5.0 x 80 mm screw through the fixture into the anchor until the anchor expands and secures against the substrate. Ensure the screw is tightened to a firm but not over-torqued level to avoid damaging the anchor or the base material. For uneven or hollow substrates, verify substrate suitability before installation.

Usage recommendations

Check the load requirements and substrate condition prior to selection. For heavy loads or hollow materials, use anchors specifically designed for those conditions or consult technical guidance. Store packs in a dry environment and keep screws and anchors together until use to prevent loss of components.