Frame anchor Koelner/Rawlplug FF1 with countersunk flange 8×80 mm, pack 26 pieces

Koelner/Rawlplug FF1 frame anchor with countersunk flange 8×80 mm is a mechanical expansion anchor designed for secure fastening in solid base materials such as concrete and solid masonry. Supplied as a pack of 26 pieces, this anchor is intended for applications where a flush-mounted head and reliable load transfer are required, for example when fixing window and door frames, mounting timber or metal profiles, and securing fixtures to load-bearing substrates.

Advantages

The FF1 frame anchor features a countersunk flange for a recessed head finish, providing a neat appearance and allowing the fastener to sit flush with the fixture surface. Its expansion mechanism ensures consistent load distribution into the substrate, improving pull-out and shear performance in suitable base materials. The anchor’s compact dimensions make it suitable for narrow edge distances and for use in prefabricated or retrofit installations where space is limited.

Suitable for

• Fixing window and door frames to concrete and solid masonry
• Attaching metal or timber profiles and mounting brackets
• Securing glazing beads, sills, and light structural fixtures
• Retrofit anchoring in renovation projects where a flush finish is required

When it may not be suitable

This anchor is designed for solid base materials and is not intended for use in hollow or perforated blocks without appropriate sleeves or plugs. It may not be suitable for extremely soft substrates, lightweight panels, or applications requiring high corrosion resistance unless the material and coating match the environmental conditions. For heavy structural loads or seismically rated connections, verify suitability with structural data and local codes.

Key specifications

• Anchor type: mechanical expansion frame anchor with countersunk flange
• Nominal diameter: 8 mm
• Overall length: 80 mm
• Head style: countersunk flange for flush mounting
• Pack quantity: 26 pieces
• Recommended base materials: concrete, solid masonry

How to use

Drill a hole in the substrate to the correct diameter and depth for an 8×80 mm anchor, ensuring the hole is clean of dust and debris. Insert the anchor through the fixture into the hole until the countersunk flange rests against the surface, then tighten the fixing screw or nut to activate the expansion mechanism. Tighten to the recommended torque specified by the anchor manufacturer to achieve proper expansion and load transfer. After installation, check that the anchor head is flush and that the fixture is securely held.

What to consider before purchase

• Confirm substrate type is solid concrete or solid masonry; not suitable for hollow blocks without appropriate inserts
• Check required anchor length and edge/distances to ensure sufficient embedment and spacing
• Verify material and coating compatibility with the installation environment (e.g., indoor vs outdoor, humid conditions)

Usage recommendations

Use a drill with the correct carbide masonry bit for an accurate hole, clean the hole thoroughly before insertion, and apply the manufacturer’s recommended torque values. For critical or load-bearing installations, follow structural design guidelines and local building regulations; when in doubt consult a structural engineer or the anchor manufacturer’s technical documentation.