Koelner/Rawlplug frame anchor FF1 with cone 8x100 mm, pack 24 pieces

Koelner/Rawlplug frame anchor FF1 with cone 8x100 mm, pack of 24 pieces is a mechanical fixing designed for reliable fastening of door and window frames and other structural elements into solid base materials such as concrete, solid brick and natural stone. The cone-shaped head improves load distribution and seating of the frame anchor, helping to achieve a firm connection between the fixture and substrate. Supplied as a pack of 24 anchors sized 8x100 mm, this product is intended for professional and DIY applications where repeated, consistent frame fixings are required.

Advantages

The Koelner/Rawlplug frame anchor FF1 combines a simple installation principle with consistent performance. Its cone head design promotes even expansion and better contact with the substrate, which enhances pull-out resistance and stability under load. The 8x100 mm size provides sufficient embedment depth for common frame mounting tasks. Supplied in a pack of 24, the anchors offer a convenient quantity for multiple installations and reduce the need for frequent repurchasing.

Suitable for

• Fastening door and window frames to concrete, solid brick and natural stone
• Mounting structural timber or metal profiles to load-bearing masonry
• Applications requiring mechanical anchors with improved seating and load distribution
• Small to medium renovation and construction projects where multiple identical fixings are needed

When it may not be suitable

This frame anchor is intended for use in solid base materials; it is not suitable for hollow or perforated blocks, lightweight aggregate blocks with cavities, or thin non-load-bearing panels. For substrate types with cavities or for use in hollow bricks, chemical anchors or dedicated hollow-wall fixings should be considered. Also, this mechanical anchor does not replace anchors specified for seismic zones or specialized high-load structural applications without confirmation of suitability by a structural engineer.

Key specifications

• Anchor type: mechanical frame anchor with cone head
• Size / diameter: 8 mm
• Embedment/length: 100 mm overall length
• Packing quantity: 24 pieces per pack
• Recommended substrates: concrete, solid brick, natural stone
• Typical use: door and window frame fastening, structural profile mounting

How to use

Drill a hole of the appropriate diameter and depth into the solid substrate according to the anchor size and the manufacturer's drilling recommendations. Clean the hole of dust and debris, insert the frame anchor so the cone head seats against the fixture or frame, and then tighten the bolt or screw to expand the anchor inside the drilled hole. Ensure correct embedment depth and full expansion for secure holding. Follow standard installation torque and spacing guidelines for frame fixings to maintain load distribution and avoid damage to the substrate or the anchor.

What to consider before purchase

• Verify that the substrate is solid (concrete, solid brick, natural stone) and suitable for mechanical anchors
• Confirm the required anchor diameter and length for the fixture thickness and expected loads
• Check local building codes or structural requirements for frame fixings, especially in load-bearing or safety-critical applications
• Determine whether corrosion resistance or special material properties are required for the installation environment

Usage recommendations

Use a clean, correctly sized drill bit and remove dust from the hole before insertion. Maintain recommended spacing between anchors and follow manufacturer torque values to ensure consistent performance. For high or critical loads, consult technical specifications or a qualified engineer to select the correct anchor type and installation method.