Anchor plug Koelner/Rawlplug quick fixing 6 x 60 mm with flange, pack 50

Koelner/Rawlplug quick fixing anchor plugs 6 x 60 mm with flange, pack of 50 are plastic expansion anchors designed to secure screws and threaded fasteners in concrete, solid brick and other solid substrates. The flanged head helps center the anchor and prevents it from being pushed too deep into the hole, while the 6 x 60 mm size is intended for medium-duty fastening tasks common in construction and installation work.

Advantages

These quick fixing anchor plugs offer a consistent expansion mechanism that provides reliable grip in solid base materials. The flange improves seating and alignment during installation, reducing the risk of over-insertion and aiding neat, repeatable fixing. Supplied in a pack of 50, they are convenient for small to medium projects and reduce frequent reordering.

Suitable for

• Mounting light to medium fixtures such as conduit clips, small brackets and cable channels
• Fastening into concrete, solid clay brick and other solid masonry
• General interior and exterior installation work where a flanged plastic anchor is appropriate

When it may not be suitable

These plastic anchor plugs are not intended for hollow or perforated block substrates, where different hollow-wall anchors or toggle-type fixings are required to achieve adequate load-bearing performance. They are also not recommended for heavy structural loads or critical safety applications that demand metal anchors, through-bolts, or chemical anchors rated for higher loads.

Key specifications

• Anchor type: plastic expansion anchor with flange
• Nominal diameter: 6 mm
• Length: 60 mm
• Head: flanged for improved seating
• Suitable base materials: concrete, solid brick, solid masonry
• Pack quantity: 50 pieces

How to use

Drill a hole in the substrate matching the anchor diameter and required depth, ensuring the hole is clean and free of dust. Insert the flanged anchor plug flush with the surface, then drive the appropriate screw or threaded fastener into the anchor until the anchor expands and grips the substrate. Avoid using over-length screws that could protrude or fail to fully expand the anchor. Follow screw manufacturer's guidance for recommended screw size and length for best performance.

What to consider before purchase

• Verify substrate type is solid (concrete, solid brick) and not hollow or perforated
• Check required working load — consider metal or chemical anchors for heavy or safety-critical fixings
• Confirm compatible screw diameter and length for 6 x 60 mm plastic anchors

Usage recommendations

For consistent results, use a properly sized masonry drill bit, clean the hole of dust before insertion, and choose screws that match the anchor's intended load. Store the pack in a dry place to avoid contamination and inspect anchors visually before use.