Wood screw Koelner/Rawlplug TS-6100 6x100 mm, countersunk head, TX drive

Koelner/Rawlplug TS-6100 6x100 mm is a wood screw with a countersunk conical head and a TX (Torx) drive designed for fastening wooden elements. Its 6 mm diameter and 100 mm length offer secure penetration and load distribution in solid timber and engineered wood products. The countersunk head allows the fastener to sit flush with or below the surface for a neat finish, while the TX drive provides improved torque transfer and reduced cam-out during installation.

Advantages

This wood screw combines a robust profile with a conical countersunk head to deliver stable connections in carpentry and timber construction. The TX drive reduces slippage and enables the application of higher tightening torque with compatible drivers. The 6 mm shank diameter and 100 mm length ensure good pull-out resistance and adequate engagement depth for most structural and general-purpose wood joints.

Suitable for

• Joining structural timber elements such as beams and joists
• Fixing wooden boards, panels and cladding
• Carpentry, framing and general woodwork
• Applications requiring a flush finish in wooden surfaces

Key specifications

• Diameter: 6 mm
• Length: 100 mm
• Head type: Countersunk (conical)
• Drive type: TX (Torx)
• Material: Steel (typical for wood screws; refer to packaging for finish or coating)

How to use

Select a properly sized TX bit and set the driver to an appropriate torque for the timber density to avoid over-tightening. When necessary, pre-drill a pilot hole to prevent splitting in hardwoods or near edges; choose a pilot diameter appropriate to the screw shank. Drive the screw until the head is flush with or just below the wood surface. For applications requiring countersunk heads to be concealed, use a suitable plug or filler if desired.

Usage recommendations

For structural or load-bearing timber connections, follow local building codes and fastening guidelines. Use corrosion-resistant or coated fasteners in outdoor or humid environments and verify compatibility with the specific wood type and any treatments.