Pushbutton switch Kontakt-Simon AD1/11, white plastic, 250 V AC, 10 A, 90×37.5 mm

Kontakt-Simon AD1/11 is a pushbutton switch in a white plastic housing designed for use in AC electrical circuits. It is rated for operation at up to 250 V AC and a nominal current of 10 A. Compact and lightweight, with overall dimensions approximately 90 mm wide and 37.5 mm deep and a weight of about 55 g, the switch provides a simple manual control element for lighting and small appliances in residential and light-commercial installations.

Advantages

The pushbutton switch offers reliable switching for AC loads up to the specified voltage and current ratings, with a compact footprint that saves space in switch panels or mounting boxes. A white plastic enclosure provides electrical insulation and a neutral appearance that integrates with common interior finishes. Its lightweight construction facilitates installation and reduces strain on mounting surfaces.

Suitable for

• Manual control of interior lighting circuits
• Switching small household appliances and fans
• Integration into residential and light-commercial switch panels
• Retrofit or new installations where a compact control element is required

Key specifications

• Rated voltage: 250 V AC
• Nominal current: 10 A
• Housing material: white plastic
• Overall dimensions: 90 mm (width) × 37.5 mm (depth) approximately
• Weight: about 55 g

How to use

Install the pushbutton switch in accordance with local electrical regulations and best practices. Ensure the supply is de-energized before making any connections. Wire the switch into the circuit using conductors and terminals suitable for the rated current and voltage. Once installed and secured in the mounting location, restore power and operate the pushbutton to control the connected load. If used in multi-gang frames or panels, verify proper alignment and clearance with adjacent devices.

Usage recommendations

Use this switch only within its rated electrical limits (250 V AC, 10 A). For loads with higher current draw or inductive loads such as large motors, use a switch or contactor sized appropriately. Periodically check mounting and wiring connections for signs of wear or looseness, and replace the device if physical damage or degraded performance is observed.