Electrical switch Kontakt‑Simon CW7.01/11, plastic housing, white, IP20/IP44, 250V AC, 10A, 77×42 mm

Kontakt‑Simon CW7.01/11 is a compact electrical switch in a white plastic housing, intended for use in AC circuits up to 250 V with a nominal current rating of 10 A. The device has a compact footprint with dimensions of 77 × 42 mm and a lightweight construction of 56.5 g. Depending on mounting and installation conditions, the switch can provide either IP20 or IP44 protection, making it suitable for typical residential and light commercial wiring and replacement projects where a straightforward, reliable switching solution is required.

Advantages

The switch offers a practical combination of compact size, low weight and a standard white finish that integrates with common interior fittings. Rated for 250 V AC and 10 A, it meets typical load requirements for lighting and small appliances. The option to achieve IP44 protection in appropriate installations increases installation flexibility, while the plastic housing provides electrical insulation and corrosion resistance compared with metallic housings.

Suitable for

• Residential lighting circuits and room switches
• Replacement of existing domestic switches in apartments and houses
• Light commercial interiors such as offices and small shops
• Installations where a compact, unobtrusive switch is required

Key specifications

• Rated voltage: 250 V AC
• Nominal current: 10 A
• Housing material: plastic
• Colour: white
• Protection level: IP20 (standard); IP44 when mounted with appropriate sealing
• Dimensions: 77 × 42 mm (width × depth)
• Weight: 56.5 g

How to use

Install the switch following applicable electrical codes and safety standards. Isolate power before removing existing devices or wiring. Connect supply and load conductors to the terminals ensuring correct polarity and secure screw tightening to manufacturer's torque recommendations. After wiring, mount the unit into the switch box or frame, verify seals or gaskets if IP44 protection is required, restore power and test switching operation under the intended load. If unsure about wiring or local regulations, use a qualified electrician.

Usage recommendations

Use this switch for circuits within its electrical ratings and avoid loads that exceed 10 A. For locations exposed to moisture or splashing, ensure proper mounting accessories and sealing are applied to achieve IP44 protection. Periodically inspect connections and the housing for signs of wear or damage and replace the switch if any degradation is found.