Electrical switch Kontakt-Simon CZW1.01/11, plastic housing, 250 V AC, 10 A, IP20/IP44, white, 77×42 mm

Kontakt-Simon CZW1.01/11 is an electrical switch in a white plastic housing designed for standard residential and light commercial installations. The switch is rated for 250 V AC and supports a nominal switching current of 10 A. Two protection ratings apply depending on mounting and environmental sealing: IP20 for typical indoor installation and IP44 when appropriate sealing or a compatible cover is used. The unit’s compact footprint (77×42 mm) and lightweight construction (approximately 60 g) allow for ease of integration into common wall boxes and modular switch panels.

Advantages

The switch offers reliable mechanical switching at mains voltage up to 250 V AC and a 10 A load capacity suitable for many lighting and small-appliance circuits. Its plastic housing provides electrical insulation and reduces weight while the option for IP44 protection increases resistance to splashes and dust ingress when installed with compatible covers. The compact dimensions enable installation in limited-space environments and standard mounting systems.

Suitable for

• Standard home lighting circuits
• Control of small appliances and fans within the 10 A rating
• Retrofit or replacement in existing switch frames or modular panels
• Indoor installations requiring IP20 protection or protected locations requiring IP44

Key specifications

• Voltage rating: 250 V AC
• Nominal current: 10 A
• Protection ratings: IP20 (standard), IP44 (with appropriate sealing or cover)
• Housing material: plastic, white finish
• Dimensions: 77 mm × 42 mm (width × depth)
• Weight: approximately 60 g

How to use

Install the Kontakt-Simon CZW1.01/11 switch into a compatible wall box or modular frame following local electrical codes. Ensure power is turned off before making connections. Connect supply (live and neutral as required by the circuit) and load conductors to the designated terminals, tighten terminal screws to the manufacturer’s recommended torque, and verify correct mechanical fixation. If increased ingress protection is required, fit a compatible sealed cover or enclosure to achieve IP44 rating. Restore power and test the switch operation under load.

Usage recommendations

Use this switch within its specified electrical limits: 250 V AC and 10 A. For environments exposed to moisture or splashing, ensure the switch is installed with appropriate sealing or an IP44-rated cover. Periodically inspect terminal connections for tightness and signs of wear, and replace the switch if mechanical or electrical faults occur.