Mixing paddle KWB 497007 400 mm Stainless steel Yellow

The KWB 497007 mixing paddle (400 mm) is a stainless steel tool designed to stir paints, varnishes and similar materials in containers ranging from 1 to 15 kg. It has a 70 mm diameter basket with a special stirring geometry for improved and faster mixing and a hexagonal shank to ensure a firm grip in a drill chuck. The paddle is intended for use with power drills of at least 500 W and is not suitable for liquids with flashpoints below 21°C.

Advantages

Constructed from stainless steel for corrosion resistance and durability, the paddle delivers consistent mixing performance. The 70 mm basket and optimized stirring geometry increase mixing efficiency and reduce processing time. A hexagonal shank provides secure engagement in standard drill chucks to minimise slipping during operation. The 400 mm overall length allows effective reach into typical paint containers while remaining compact enough for portable use.

Suitable for

• Stirring paints and varnishes in small and medium containers (1–15 kg)
• Mixing fillers, primers and similar construction materials
• DIY renovation and light professional applications
• Use with corded or cordless drills rated 500 W or higher

Key specifications

• Manufacturer: KWB
• Model / MPN: 497007
• EAN: 4009314970074
• Material: Stainless steel
• Overall length: 400 mm
• Basket diameter: 70 mm
• Shank type: Hexagonal
• Recommended drill power: ≥ 500 W
• Not suitable for liquids with flashpoint < 21°C

How to use

Install the hexagonal shank firmly into the drill chuck and tighten the chuck according to the drill manufacturer’s instructions. Place the paddle basket into the material and run the drill at a moderate speed to avoid splashing; gradually increase speed if needed to achieve a uniform mix. Move the paddle up and down gently to ensure full integration of pigments and additives. After mixing, run the drill briefly in clean water (or appropriate solvent for the material) to remove residue, then dry and store the paddle to prevent corrosion or contamination.

Usage recommendations

Use with drills rated 500 W or more and avoid mixing highly flammable liquids or solvents with flashpoints below 21°C. Wear appropriate personal protective equipment such as gloves and eye protection when mixing chemicals and ensure adequate ventilation.