Rack accessory Lanview RAH100W-THM – 1U rack shelf accessory for server racks

Lanview RAH100W-THM is a 1U rack shelf accessory for 19" server racks that includes an integrated 100W heater and winter thermostat. The unit is designed to mount on a 35 mm DIN rail inside a rack, providing gentle internal heating and helping to prevent condensation and low-temperature operation issues for network equipment, power adapters and small peripherals. The heater features an aluminum body, an integrated thermostat and a pre-fitted power cable with a connection terminal suitable for 1.5–2.5 mm² conductors.

Advantages

The shelf combines physical support for compact devices with a built-in 100W heater and winter thermostat to maintain stable internal rack temperature. Its aluminum construction ensures effective heat transfer while remaining lightweight. DIN-rail mounting and a terminal entry for 1.5–2.5 mm² make installation straightforward in standard server cabinets.

Suitable for

• Preventing condensation and low-temperature faults in server and network racks
• Heating small enclosed rack compartments containing switches, power adapters or storage devices
• Use in telecommunication cabinets, edge racks or other indoor rack installations exposed to cold ambient temperatures

Key specifications

• Power supply: 220 V, 50/60 Hz
• Heating capacity: 100 W
• Heater body: aluminum
• Mounting: 35 mm DIN rail
• Integrated winter thermostat
• Connection: power cable with terminal entry for 1.5–2.5 mm² conductors
• Body temperature: 85 °C
• Height: 85 mm

How to use

Mount the RAH100W-THM on a 35 mm DIN rail inside a standard 19" rack at a suitable position that provides support for the intended devices. Connect the power cable to a 220 V, 50/60 Hz supply using the terminal entry rated for 1.5–2.5 mm² conductors. The integrated winter thermostat will control the heater to maintain internal rack temperature; verify correct operation after initial power-up and monitor temperature in the enclosure as required.

Usage recommendations

Install the heater in indoor racks or cabinets only; ensure adequate ventilation and follow local electrical regulations. Do not exceed the specified conductor size for the terminal entry and avoid placing heat-sensitive components in direct contact with the heater body.