Single-pole switch Legrand Niloe Selection 10AX aluminium model 762100

Legrand Niloe Selection single-pole switch 10AX in aluminium (model 762100) is a wall-mounted mechanical switch intended for control of lighting circuits in residential and commercial interiors. The device provides single-circuit on/off switching with a conventional rocker mechanism. Its aluminium finish and compact dimensions make it suitable for replacing standard switches or for fitting in new installations where a neutral aesthetic and reliable manual control are required.

Advantages

The switch offers a 10AX switching rating suitable for a range of lighting loads including incandescent, mains LED and other low-power lamps within that rating. Its mechanical rocker design ensures straightforward operation and long-term durability under normal use. The aluminium appearance provides a neutral, modern look that integrates with different interior styles and standard mounting frames. The unit is compatible with common domestic and commercial wiring practices for single-pole switching.

Suitable for

• On/off control of ceiling or wall lighting circuits
• Replacement of existing single-pole switches in homes or offices
• New electrical installations requiring a standard manual switch
• Switching incandescent and LED fixtures within a 10AX load

Key specifications

• Type: Single-pole (single-circuit) mechanical rocker switch
• Rated switching capacity: 10AX
• Finish: Aluminium-colour faceplate
• Mounting: Standard wall-mounted flush mounting in compatible backboxes
• Operation: Manual on/off rocker
• Application environment: Indoor use for residential and commercial interiors

How to use

Install the switch in a compatible flush mounting backbox following local electrical regulations and with the supply disconnected. Connect the live (line) conductor to the common (L) terminal and the switched live to the output terminal; earth and neutral conductors should be handled according to the circuit requirements and local codes. After secure wiring and mounting, restore power and operate the rocker to switch the connected lighting circuit on and off. Use only within the specified 10AX rating and ensure lamp types and ballast/driver compatibility when switching LED or electronic lighting.

Usage recommendations

For safe and compliant installation, have wiring and mounting performed or verified by a qualified electrician. Verify that the connected loads do not exceed the 10AX rating and confirm compatibility with LED drivers or dimmers if these are present in the circuit. Clean the aluminium finish with a soft, dry cloth; avoid abrasive cleaners and excessive moisture.