LED module LEMLUX LM-1050-NW 12V 0.5W 63 lm neutral white 4000K

LEMLUX LM-1050-NW is a compact LED module designed for low-voltage lighting systems. Operating at 12 V and consuming 0.5 W, the module delivers approximately 63 lumens of neutral white light at 4000 K. Its small footprint and low heat output make it suitable for installation in cabinets, displays, accent fixtures and other confined spaces where consistent neutral white illumination is required.

Advantages

The module combines low power consumption with relatively high luminous efficacy for its size, providing efficient light output while minimizing energy use. Stable color temperature at 4000 K ensures uniform neutral white illumination across installations. Its long operating life reduces maintenance needs and replacement frequency. The low-voltage design supports safe integration into 12 V systems commonly used in residential and commercial accent lighting.

Suitable for

• Cabinet and under-cupboard lighting
• Display cases and retail shelving illumination
• Accent and architectural detailing
• Signage backlighting and edge lighting

Key specifications

• Nominal supply voltage: 12 V DC
• Power consumption: 0.5 W
• Luminous flux: 63 lm
• Color temperature: 4000 K (neutral white)
• Light output: directional module with compact form factor
• Typical applications: low-voltage accent and display lighting

How to use

Install the LED module in a compatible 12 V DC circuit following local electrical regulations. Secure the module in the intended fixture or mounting surface, ensuring adequate mechanical support and minimal thermal build-up. Connect positive and negative leads to a suitable 12 V DC driver or power supply sized to accommodate the total load of all modules in the circuit. Confirm polarity before powering and verify that connections are insulated and strain-relieved. For dimming, use a driver or controller specified for low-voltage LED modules.

Usage recommendations

For optimal performance, place modules where airflow prevents excessive heat accumulation and use a 12 V DC power supply with appropriate current capacity and short-circuit protection. When designing lighting layouts, allow for spacing and mounting that maintain even illumination and avoid visible hotspots. Follow local electrical codes and manufacturer guidance for wiring and driver selection.