Frame Protector Lizard Skins JUMBO (M) 85×245 mm orange

Lizard Skins JUMBO frame protector (size M) is a self-adhesive protective pad in orange, measuring 85 × 245 mm. It is designed to protect bicycle frame surfaces from cable rub, chips and abrasion where cables, bottles or external elements contact the downtube or top tube. The pad is easy to apply and trim to match curved or flat frame areas and provides long-term protection for road, gravel and mountain bikes without altering frame geometry.

Advantages

The protector features a durable adhesive backing that holds securely to painted and raw surfaces while allowing clean removal when replacement is required. Its Jumbo M size covers larger contact areas to reduce paint damage and noise from cable movement. The textured orange surface adds visible coverage and can be trimmed to create custom shapes for asymmetric frame designs.

Suitable for

• Protecting downtube and top tube areas from cable rub and housing wear
• Shielding frame paint from stone chips and abrasion on road and gravel rides
• Application on MTB frames where bottles, cages or bags contact the top tube
• Custom trimming for irregular or curved frame sections

Key specifications

• Material: self-adhesive protective film with textured surface
• Size: approximately 85 × 245 mm
• Color: orange
• Mounting: pressure-activated adhesive suitable for painted and non-painted surfaces
• Finish: durable, abrasion-resistant top layer

How to use

Clean the target frame area thoroughly with isopropyl alcohol or a mild degreaser and allow to dry. Measure and, if needed, trim the protector to the desired shape using scissors or a sharp blade. Peel the backing off, align the protector on the downtube or top tube, and press firmly from the center outward to remove air bubbles. Apply steady pressure along the edges to ensure full adhesion. If repositioning is required, lift gently and reapply within a short time after placement.

Usage recommendations

For best adhesion, apply at temperatures above 10 °C (50 °F) and avoid washing or heavy exposure to rain for 24 hours after installation. Replace the protector when edges lift or surface wear compromises coverage. Store unused protectors flat in a cool, dry place away from direct sunlight.