Logo 2.0 A-12pin M/M 1.8m cable by Logo — 12-pin male-to-male, 1.8 m length

Logo 2.0 A-12pin M/M 1.8m cable is a 12-pin male-to-male connection cable with a fixed 1.8 meter length designed for devices that use A-12pin CANON-compatible connectors. The cable provides a stable wired link for signal and/or power transmission between compatible equipment. Its compact length makes it suitable for short to medium interconnections where a male-to-male 12-pin interface is required.

Advantages

The cable offers a straightforward, plug-and-play wired connection with a standardized 12-pin male interface, ensuring mechanical compatibility with A-12pin CANON-style sockets. Its 1.8 m length balances reach and cable management, reducing excess slack in installations. Constructed for typical device interconnection tasks, the cable serves as a reliable replacement for worn or damaged factory cables and supports consistent electrical contact across all 12 pins.

Suitable for

• Interconnecting devices with A-12pin CANON-compatible male sockets
• Replacing damaged or worn 12-pin male-to-male cables
• Short to medium-length wiring runs in equipment racks or workstations
• Applications requiring a fixed-length, male-to-male 12-pin link for data or power

Key specifications

• Connector type: 12-pin male to 12-pin male (A-12pin CANON-compatible)
• Length: 1.8 m
• Contact count: 12 conductive contacts
• Cable use: signal and/or low-voltage power transmission depending on device requirements
• Construction: single fixed-length molded cable assembly

How to use

Connect each 12-pin male connector to the corresponding female A-12pin socket on the devices to be linked, ensuring correct alignment of the housing and pins. Apply gentle pressure until the connector seats fully and any locking mechanism engages, if present. Verify device functionality and signal or power flow after connection. For removal, depress any latch or release mechanism before pulling the connector straight out to avoid bending pins.

Usage recommendations

Use the cable in environments within the devices' specified electrical and mechanical limits. Avoid sharp bends near the connectors, excessive tensile stress, and exposure to liquids or high temperatures. Inspect connectors periodically for corrosion or bent pins, and replace the cable if any damage to insulation or contacts is observed.