MAGNAPLAST internal sewer pipe with socket 40 mm, 0.25 m, model 10110

MAGNAPLAST internal sewer pipe with socket 40 mm, 0.25 m, model 10110 is a short, rigid pipe section designed for internal wastewater and drainage systems. The pipe has a 40 mm nominal diameter and a 0.25 m length, with an integrated socket end to enable simple push-fit or solvent-weld connections depending on system practice. It is intended for use in residential and light commercial plumbing where compact, reliable 40 mm runs are required for waste, drainage and venting subsections.

Advantages

The socketed design simplifies joining and reduces the need for additional coupling parts, ensuring faster installation and fewer potential leak points. The compact 0.25 m length permits precise fit in confined spaces and enables incremental extension or replacement of short pipe runs. Manufactured to standard dimensions for compatibility with common 40 mm internal waste fittings, the pipe provides a consistent internal bore and smooth inner surface to promote reliable flow and reduce fouling.

Suitable for

• Repairing or replacing short sections of internal wastewater and drainage piping
• Extending internal waste lines in residential bathrooms and kitchens
• Connecting fixtures and appliances to 40 mm drainage systems
• Tight or constrained installation spaces where short pipe lengths are needed

Key specifications

• Nominal diameter: 40 mm
• Length: 0.25 m
• End type: socketed connection
• Application: internal wastewater and drainage systems
• Material: rigid sewer pipe material suitable for internal plumbing (polymeric construction)

How to use

Measure and cut the existing system to the required location, ensuring clean, square pipe ends. Prepare the mating pipe or fitting according to the chosen joining method (push-fit, solvent weld or gasketed socket) and insert the pipe fully into the socket until seated. If solvent welding is used, apply the appropriate adhesive/primer evenly and allow recommended cure time before testing. After assembly, conduct a leak and flow test in accordance with local plumbing standards to confirm a secure connection.

Usage recommendations

Use this 40 mm socketed pipe for internal, non-pressurised wastewater and drainage lines only. Match the joining method and gasket type to the existing system and follow applicable building codes. Avoid exposure to direct sunlight for prolonged periods and protect from mechanical damage during installation. For runs requiring different diameters or external drainage, select suitable fittings or pipes designed for those applications.