Internal Sewage Pipe with Socket 50 mm 0.25 m MAGNAPLAST 10210

MAGNAPLAST internal sewage pipe with socket, 50 mm diameter and 0.25 m length is a compact PVC connection component intended for indoor wastewater and drain installations. Designed for use in sanitary and plumbing systems, this short section provides a reliable joint between fixtures, branch lines and existing pipework in residential and commercial interiors. The pipe’s socket end simplifies assembly and helps create a sealed connection when used with appropriate seals and solvent or elastomeric fittings.

Advantages

The product offers a small footprint and straightforward installation for confined spaces where only a short replacement or connector section is required. Manufactured from PVC, it combines corrosion resistance and dimensional stability for long-term use in typical indoor wastewater conditions. The socketed end reduces the need for additional fittings and supports a secure joint when matched with compatible seals and adhesives.

Suitable for

• Connecting sanitary fixtures such as sinks, washbasins and floor drains
• Short repair runs and branch connections in indoor drainage systems
• Tight or confined installation spaces behind cabinets or inside service ducts

Key specifications

• Material: PVC suitable for internal wastewater applications
• Outer diameter: 50 mm
• Length: 0.25 m (250 mm)
• End type: socketed connection for slip-fit and sealed joints
• Intended use: internal drainage and sanitary installations

How to use

Measure and cut the existing pipework to provide straight, clean ends. Ensure the socket and spigot are free of debris and dry. Apply the appropriate seal or solvent cement compatible with PVC and the socket system used; follow the seal manufacturer’s instructions for curing times. Insert the plain end into the socket to the required depth, maintaining alignment to avoid stress points. After assembly, check joints for leaks by running water through the system and observing connections under normal operating pressure.

Usage recommendations

Use compatible PVC seals or solvent-based adhesives specified for internal wastewater systems and ensure installation complies with local plumbing codes. Avoid exposure to direct sunlight or external mechanical loads; this component is intended for indoor use only.