MAGNAPLAST internal sewer 45° branch HETA 110/50 mm (model 11560)

MAGNAPLAST internal sewer 45° branch HETA 110/50 mm (model 11560) is a PVC plumbing fitting designed to join a 110 mm main drain with a 50 mm branch at a 45° angle. Intended for indoor wastewater and soil pipe systems, this compact junction minimizes flow disturbance and provides a reliable connection point for branch lines in residential and commercial drainage installations.

Advantages

The fitting is made of durable PVC suitable for standard wastewater conditions and offers a space-efficient design that simplifies routing inside walls and service shafts. A 45° branch angle reduces turbulence and potential clogging compared with perpendicular connections, while standard diameters ensure compatibility with common drainage pipes and couplings. The smooth internal surface supports unobstructed flow and easier maintenance.

Suitable for

• Indoor sanitary drainage systems in residential buildings
• Commercial and light-industrial wastewater networks
• Connections from branch fixtures such as sinks, showers or appliances to a 110 mm soil stack
• Tight or compact installation spaces where angled branch connections are required

Key specifications

• Material: PVC suitable for wastewater and soil pipe installations
• Main pipe diameter: 110 mm
• Branch pipe diameter: 50 mm
• Branch angle: 45° to the main run
• Internal smooth bore to reduce flow resistance
• Compact form factor for wall or shaft installation

How to use

Prepare the ends of the connecting pipes by ensuring they are clean, cut square and free of burrs. Apply the appropriate solvent cement or approved sealing method for PVC drainage systems to the socket and spigot surfaces according to local regulations and manufacturer instructions. Insert the 50 mm branch and the 110 mm main pipe fully into their respective fittings, ensuring correct alignment at the 45° junction. Allow the joint to cure for the recommended time before testing the system with water.

Usage recommendations

Installations should follow local plumbing codes and standards. Use compatible PVC pipes and seals, check for proper slope and support of horizontal runs, and avoid introducing excessive mechanical stress at joints. For chemical waste or high-temperature discharges, verify material suitability prior to installation.