External sewage 45° elbow MAGNAPLAST 200 mm (model 23120)

MAGNAPLAST external sewage 45° elbow with a 200 mm diameter is an injection-molded fitting designed to change the direction of external drainage pipes by 45 degrees. Intended for use in surface and subsurface drainage systems, the fitting provides compatibility with matching MAGNAPLAST pipes and enables sealed joints for reliable conveyance of wastewater and rainwater in external sewer networks.

Advantages

The 45° elbow is manufactured by injection molding to ensure dimensional accuracy and consistent wall thickness. Its geometry reduces flow resistance at the change of direction compared with sharper bends, supporting efficient drainage. The fitting is sized for a 200 mm nominal diameter and is compatible with corresponding MAGNAPLAST fittings to form sealed, mechanically secure connections. The product simplifies alignment and directional transitions in installation layouts.

Suitable for

• External sewer and wastewater networks requiring DN200 components
• Rainwater drainage systems and roof runoff connections
• Underground drainage installations and collector lines
• Repair or modification of existing external drainage with 200 mm pipes

Key specifications

• Angle: 45° bend for directional change
• Nominal diameter: 200 mm suitable for DN200 piping systems
• Manufacturing method: injection-molded fitting for consistent dimensions
• Connection type: designed for sealed joints with compatible pipes and fittings
• Material characteristics: corrosion-resistant polymer suitable for external drainage (manufacturer standard polymer)

How to use

Select the 45° elbow where a gradual directional change is required in an external drainage run. Prepare the pipe ends and mating fitting sockets according to the pipe manufacturer's recommendations to ensure clean, square cuts and correct insertion depth. Assemble the elbow with compatible MAGNAPLAST pipes and fittings, following the sealing method specified by the pipe system (e.g., gasketed joint or solvent/adhesive where applicable). Confirm alignment and slope for gravity drainage before backfilling any trench or covering.

Usage recommendations

Verify system compatibility by matching nominal diameter and joint type with existing pipes. Observe local codes for burial depth, bedding, and compaction when installing underground; provide accessible inspection points where required in the drainage layout.