PE threaded internal elbow MAGNAPLAST 63 mm x 6/4" (model 448611)

PE threaded internal elbow MAGNAPLAST 63 mm x 6/4" (model 448611) is a polyethylene pipe fitting designed to create a compact 90° transition between a 63 mm PE pipe and a 6/4" (1.5") threaded component. It is intended for installations where a durable, low-weight elbow with an internal thread is required to connect PE piping to valves, meters or other threaded fixtures. The fitting is suitable for potable water distribution, irrigation systems and general utility piping where a PE-to-thread connection is necessary.

Advantages

The MAGNAPLAST internal elbow is made of polyethylene, offering resistance to corrosion and chemical degradation while maintaining low thermal conductivity and light weight. Its internal threaded end provides a standardized mechanical interface for secure attachment of threaded components without direct heat or complex joining procedures. The elbow's compact geometry reduces space requirements at direction changes and simplifies routing in confined installations.

Suitable for

• Connecting 63 mm polyethylene pipelines to 6/4" (1.5") threaded valves or fittings
• Domestic and commercial water supply systems
• Irrigation and sprinkler network connections
• Utility piping where a right-angle PE-to-thread transition is required

Key specifications

• Material: polyethylene (PE)
• Connection type: compression/PE socket to internal threaded outlet
• PE pipe size: 63 mm nominal
• Thread size: 6/4" (1.5") internal thread
• Shape: 90° elbow
• Application: water supply, irrigation and general utility piping

How to use

Prepare the PE pipe by cutting a clean, square end and deburring the internal and external edges. Insert the PE pipe into the socket end of the elbow following the manufacturer's guidance for insertion depth and use the recommended compression or electrofusion method if applicable for the specific MAGNAPLAST socket type. Threaded components should be engaged into the internal thread with appropriate sealing (for example, PTFE tape or suitable thread sealant) as required by the installation. Ensure alignment and torque are applied within the limits recommended for plastic fittings to avoid over-stressing the thread or body.

Usage recommendations

Verify compatibility of the threaded component material and sealing method with polyethylene fittings; avoid excessive mechanical loads or high torque on the thread. Follow local regulations and manufacturer installation instructions for pressure ratings, temperature limits and approved joining techniques to ensure long-term performance.