Masonry chisel Makita B-14071

The Makita B-14071 masonry chisel is a hand tool with a flat tip designed for controlled chiselling and material removal in masonry tasks. At 260 mm in length and with a 40 mm cutting edge, this chisel provides a balance of reach and contact area for accurate work on brick, block and stone surfaces. The hardened working edge and solid shaft construction are intended to withstand repeated impact when used with a hammer or mallet on building and renovation sites.

Advantages

The flat tip and 40 mm cutting edge allow for consistent, straight cuts and effective removal of mortar joints and small sections of masonry. Its 260 mm overall length provides user control and sufficient reach into joints and crevices. The chisel is constructed from tool steel heat-treated for improved edge retention and resistance to deformation under impact. Its profile and weight distribution are designed to deliver predictable striking response when used with compatible striking tools.

Suitable for

• Removing mortar between bricks and blocks
• Cutting or shaping small sections of brick, stone or concrete
• Preparing edges and joints for repair or repointing
• General masonry demolition and detail work

Key specifications

• Tip style: flat
• Overall length: 260 mm
• Cutting edge width: 40 mm
• Material: heat-treated tool steel (hardened working edge)
• Intended use: manual chiselling with hammer or mallet

How to use

Position the flat tip against the mortar or masonry to be removed and strike the chisel with a hammer or mallet, using controlled blows to avoid damaging surrounding material. Work progressively along the joint or cut line, adjusting angle and force as needed to remove small amounts of material at a time. For safety and best results, secure loose sections and clear debris frequently to maintain a clean work area and accurate sight lines.

Usage recommendations

Wear appropriate personal protective equipment such as safety goggles, gloves and hearing protection. Use the chisel with a hammer or mallet suitable for masonry work and avoid excessive sideways levering to prevent chisel damage. Inspect the chisel regularly for signs of wear or mushrooming at the striking end and dress or replace the tool if deformation is present.