Sanding Paper Makita D-58584 K60 – abrasive sheets for wood, grit K60

Makita D-58584 K60 sanding paper is designed for efficient wood surface preparation and material removal. These abrasive sheets have K60 grit suitable for medium to coarse sanding tasks, helping to accelerate the removal of paint, varnish and rough material while shaping and leveling wooden surfaces. The sheets are intended for use with sheet-compatible sanding tools and manual sanding blocks, making them appropriate for carpentry, renovation and finishing operations where faster stock removal is required.

Advantages

The K60 abrasive provides a balance between cutting speed and surface control, removing material quickly while maintaining a predictable scratch pattern that is easy to refine with finer grits. The sheets are sized for standard sheet sanders and manual blocks, offering flexibility for both power-tool and hand-sanding workflows. Durable abrasive coating resists premature wear during aggressive sanding tasks and supports consistent performance across a sanding session.

Suitable for

• Removing old paint or varnish from wooden surfaces
• Shaping and leveling softwoods and hardwoods before finishing
• Rapid stock removal in carpentry and joinery
• Initial surface preparation prior to applying primers or fillers

Key specifications

• Abrasion grade: K60 (medium-coarse)
• Intended material: wood and wood-based substrates
• Format: flat sheet compatible with sheet sanders and sanding blocks
• Application: manual and powered sanding for preparation and material removal

How to use

Attach the sanding sheet to a compatible sheet sander or secure it to a sanding block, ensuring the abrasive side faces the workpiece. Begin sanding with even pressure and steady passes along the grain when working with wood to minimize visible scratches. For heavy material removal, progress with controlled overlapping strokes and check the surface frequently to avoid excessive gouging. After achieving the desired profile or removal, switch to progressively finer grits to refine the surface before priming or finishing.

Usage recommendations

For optimal results, wear appropriate dust protection and eye protection when sanding. Use K60 to remove coatings and shape stock, then follow with finer grits (for example K80–K120 and higher) to prepare the surface for staining or topcoat. Test on a scrap piece of the same material to confirm the abrasive aggressiveness and adjust sanding pressure as needed.