Abrasive roll Makita P-38124 Coarse grit P80 120 mm 5 m

The Makita P-38124 Coarse grit P80 abrasive roll is a manual sanding material designed for shaping and smoothing surfaces that require a more aggressive cut. Measuring 120 mm in width and 5 m in length, the roll supplies a continuous strip of P80 abrasive suitable for removing paint, leveling rough timber, and preparing substrates for subsequent finer sanding or finishing. The open roll format allows cutting to custom lengths for hand sanding blocks or wrapping around sanding drums and sponges.

Advantages

This coarse P80 abrasive provides fast material removal and consistent performance across the full 120 mm working width. The roll format reduces waste by enabling users to dispense only the length needed, and the durable backing supports manual pressure without premature tearing. The abrasive grain is formulated to maintain cutting action during extended use on wood, composite, and painted surfaces.

Suitable for

• Stripping old paint and varnish from wooden surfaces
• Rapid stock removal on soft and hardwood
• Shaping and rough sanding of fillers and composites
• Preparing surfaces before medium and fine grit sanding
• Use with hand sanding blocks, sanding drums, and abrasive holders

Key specifications

• Grit: P80 (coarse)
• Width: 120 mm
• Length: 5 m
• Format: continuous roll for cutting to length
• Suitable backing: flexible paper or cloth-style backing for manual use

How to use

Cut the roll to the required length and attach it to a hand sanding block, sanding drum, or wrap it around a sanding sponge. Apply even pressure and move the abrasive along the workpiece with steady, overlapping strokes. For best results, work with the material grain on wood and periodically check the surface to avoid over-sanding. Replace the abrasive section when the cutting action diminishes or the surface becomes clogged with debris.

Usage recommendations

For efficient results, use the P80 abrasive for initial aggressive passes, then progress to finer grits for smoothing and finishing. Keep the abrasive clean by tapping or brushing out debris, and use appropriate personal protective equipment such as dust masks and eye protection when sanding.