Power Cable MANHATTAN UK BS1363 to C5 1.8 m 3-pin 2.5 A 250 V for Laptop/Printer, black

The MANHATTAN Power Cable UK BS1363 to C5 is a 1.8 m mains lead designed to connect devices with an IEC 60320 C6 (commonly called C5 or "cloverleaf") inlet to a standard UK three‑pin (BS1363 / Type G) wall outlet. Rated at 2.5 A and 250 V, this black power cord is intended as a replacement or spare for laptop and notebook power adapters, compatible printers and other equipment that accept a C5/C6 connection. The cable uses folded copper conductors, a durable PVC jacket and molded strain reliefs to provide a stable, grounded power connection for everyday use.

Advantages

This power cable offers a grounded three‑pin connection for improved safety and stable operation of compatible devices. With a 1.8 m length it provides extra reach compared with many short adapter leads while remaining compact enough for transport. The construction includes molded boots and strain reliefs to reduce stress at the connectors, and the PVC jacket resists wear and flexing. Rated at 2.5 A and 250 V, the lead is suitable for typical laptop and small printer power requirements and conforms to common mains wiring standards.

Suitable for

• Connecting laptop or notebook power adapters with a C6/C5 inlet to UK mains outlets
• Powering printers and multifunction devices that accept a C5 connector
• Use as a replacement, spare or travel power cord for compatible electronics

When it may not be suitable

This cable is not suitable for devices that require higher current than 2.5 A or that use other connector types (for example IEC C13, C7, or proprietary plugs). It is designed specifically for mains systems using the UK BS1363/Type G plug; use in other countries requires an appropriate adapter or a different regional lead. It is not intended to convert voltage between regional power systems.

Key specifications

• Connector (mains): UK BS1363 / Type G, 3‑pin grounded
• Connector (device): IEC 60320 C6 (female) / commonly referred to as C5/Cloverleaf inlet
• Length: 1.8 m
• Current rating: 2.5 A
• Voltage rating: 250 V
• Cable type: H05VV‑F 3G 0.75 mm²
• Conductor: bare copper
• Jacket material: PVC (black)
• Connector angle: 90° (device end)

How to use

Ensure the device to be powered is switched off and disconnected from other power sources. Insert the C5 (female) end of the cable into the device's C6 inlet until it seats firmly. Plug the BS1363 Type G plug into a compatible UK wall outlet. After connection, switch on the outlet or the device according to the device manufacturer's instructions. To disconnect, switch the device or outlet off first, then remove the mains plug followed by the device connector. Avoid pulling on the cable; grip the molded plug bodies when unplugging.

What to consider before purchase

• Confirm your device uses an IEC 60320 C6/C5 inlet (cloverleaf) before buying
• Check that 2.5 A and 250 V ratings meet your device's power requirements
• Ensure you need a UK BS1363 (Type G) plug or have a suitable adapter for your region

Usage recommendations

Use the cable within its rated current and voltage limits, avoid coiling it tightly while in use, and replace the lead if you notice damage to the jacket, connectors or strain reliefs. Keep the cable away from heat sources and sharp edges to maintain safe operation.