Galvanized steel pipe Margo DN50 (Ø60.3×3.2 mm) length 6 m

Galvanized steel pipe Margo DN50 (Ø60.3×3.2 mm) length 6 m is a corrosion-resistant round pipe intended for general-purpose water, drainage, heating and structural use. The pipe has an outside diameter of 60.3 mm, a wall thickness of 3.2 mm and a nominal diameter DN50. The zinc coating provides protection against atmospheric and industrial corrosion, making the pipe suitable for exposed installations and indoor utility lines. The product is supplied in a 6 m length and is compatible with threaded, welded or flanged connections and on-site cutting and fitting.

Advantages

The galvanized steel construction combines mechanical strength with surface protection to extend service life in wet or humid environments. Uniform wall thickness and consistent outside diameter enable reliable thread cutting, welding and flanging. A continuous zinc coating reduces the need for additional surface treatment and simplifies installation in typical water supply, drainage and heating systems. The 6 m length reduces the number of joints on straight runs while remaining manageable for handling and transport.

Suitable for

• Water supply and distribution lines
• Drainage and rainwater systems
• Heating installations and radiator connections
• Structural supports, scaffolding and metal framing
• On-site fabrication requiring threading, welding or flanging

Key specifications

• Outside diameter: 60.3 mm
• Wall thickness: 3.2 mm
• Nominal diameter: DN50
• Material: galvanized steel with zinc coating
• Length: 6 m
• Compatible connections: threaded, welded, flanged
• Typical applications: water, drainage, heating, structural use

How to use

Measure and mark the required length, then cut the pipe using appropriate tube cutters or a cold saw to ensure a square end. Deburr the cut edges before threading or welding to ensure proper sealing and fit. For threaded connections, follow standard threading procedures and apply appropriate thread sealant or tape. For welded joints, use welding methods suitable for galvanized steel and remove zinc coating locally if required by the welding process to ensure sound welds. For flanged connections, align flange faces and tighten bolts to recommended torque values for the flange type used.

Usage recommendations

Store pipes horizontally on supports to avoid bending and protect ends from contamination. When welding galvanized steel, work in a well-ventilated area and remove zinc from the weld zone if necessary; follow safety guidance for fumes. Select appropriate corrosion-allowance and periodic inspection intervals when used in aggressive environments.