LED driver MEAN WELL LPV-100-15 100W 15V IP20

The MEAN WELL LPV-100-15 is an AC-DC single-output LED driver that provides constant voltage (CV) output of 15 V DC with a maximum current of 6.7 A and total output power of 100 W. Designed for indoor applications, the unit accepts an AC input range of 90–264 V and has an IP20 protection rating. Its compact enclosure (52 mm × 190 mm × 37 mm) and cable output make it suitable for fixed indoor LED lighting installations.

Advantages

The LPV-100-15 delivers a stable 15 V constant-voltage output with full-load capability up to 100 W and includes short-circuit and overload protection inherent to MEAN WELL designs. Its wide AC input range allows use in different mains environments, while the compact housing and cable output simplify installation in luminaires and indoor lighting fixtures. The IP20 rating indicates suitability for dry, indoor locations.

Suitable for / Use cases

• Indoor LED strip lighting
• LED modules and panels requiring 15 V constant voltage
• Retail, office, and residential fixed lighting installations
• Retrofit projects where a compact 100 W driver is needed

Key specifications

• Output: 15 V DC, 6.7 A (max), 100 W
• Type: AC-DC single output, constant voltage (CV)
• Input voltage: 90–264 V AC
• Protection class: IP20 (indoor use)
• Dimensions: 52 mm (W) × 190 mm (D) × 37 mm (H)
• Brand / model: MEAN WELL LPV-100-15 (MPN: LPV-100-15)

How to use

Mount the LED driver in a dry, ventilated indoor location away from direct heat sources. Connect the AC mains to the input terminals following local wiring regulations and ensure correct polarity on the 15 V DC cable output to the LED load. Verify that the total LED load does not exceed 100 W and that the wiring and connectors are rated for the driver’s current. After wiring, power up and confirm stable 15 V output under load.

Usage recommendations

Use the LPV-100-15 in dry indoor environments only (IP20). For reliable operation, keep ambient temperature within the manufacturer’s recommended range, provide adequate ventilation, and avoid overloading beyond 100 W. When integrating into fixtures, secure the cable output to prevent strain on connections.