-
Weight:
Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
-
3.6 kg
-
Power consumption (typical):
Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
-
24 W
-
Power source:
What is providing power for the product e.g. mains electricity.
-
AC
-
Height:
The measurement of the product from head to foot or from base to top.
-
46 mm
-
LED indicators:
-
Switch, Status, Power
-
Signal-to-Noise Ratio (SNR):
This is the ratio of signal intensity to noise intensity.
-
-67 dB
-
Width:
The measurement or extent of something from side to side.
-
483 mm
-
Depth:
The distance from the front to the back of something.
-
224 mm
-
Product colour:
The colour e.g. red, blue, green, black, white.
-
Black
-
Cables included:
-
AC
-
Total Harmonic Distortion (THD):
Total harmonic distortion is a measure of non-linear harmonic
distortion and is given in %. Non-linear harmonic distortions are
signals which were not present in the original before the signal was
converted by the headphones. These unwanted signals are caused by the
diaphragm, whose movements do not precisely move in time with the
electric signals that cause it to move. Unfortunately, this is a
feature of all electroacoustic transducers. Although it cannot be
completely eliminated, suitable steps can be taken to minimise it.
However, the user is not interested in why this distortion takes place
but in how great the level of distortion must be for it to become
perceptible. According to the findings of several research projects, a
total harmonic distortion of 1% in the frequency range of 100 to 2000
Hz is imperceptible. Below 100 Hz, the perceptibility threshold lies
at 10%.
-
0.005 %
-
Input impedance:
-
40000 Ω
-
Audio (L/R) in:
The two sockets (ports) for receiving left audio signal (white cable) and right audio signal (red cable).
-
16
-
Headphone connectivity:
How headphones connect to a device e.g. wirelessly or via a cable and connector.
-
6.3mm
-
Frequency range:
The lowest and the hightest frequencies that can be inputted/produced.
-
20 - 20000
-
Output impedance:
-
47
-
AC input frequency:
-
50 - 60
-
AC input voltage:
The voltage of the AC electricity that is inputted into the product.
-
220 - 240
-
Gain:
-
19 dB
