Networking cable MetzConnect Ultraflex500 Cat6 SF/UTP (S-FTP) Black 2 m RJ-45–RJ-45

The MetzConnect Ultraflex500 Cat6 SF/UTP (S-FTP) networking cable is a 2 m patch cord designed for short-distance LAN connections and cabinet patching. It features shielded construction with S/FTP (also described as SF/UTP) pair and overall shielding, two RJ-45 straight male connectors with copper-plated contacts, and a black LSHF (LSOH) halogen-free sheath. The cable supports Fast Ethernet data rates up to 100 Mbit/s and is intended for use where a compact, durable, and shielded Cat6 connection is required.

Advantages

The fully shielded S/FTP design reduces electromagnetic interference and is compatible with both shielded and unshielded class EA systems when appropriate grounding is provided. AWG 26/7 stranded conductors and shielded RJ-45 connectors with 1:1 pin assignment provide reliable signal integrity. A very short boot and a small bending radius allow installation in limited-space environments, while LSHF sheath material limits halogen emissions. The cord is rated for an extended mechanical life, specified for a high number of movement cycles under load compared with standard patch cords.

Suitable for

• Patching in network cabinets and racks
• Short-distance LAN links between switches, routers and patch panels
• Connections to VoIP terminals and desktop network devices
• Environments requiring shielded Cat6 cabling to reduce EMI

Key specifications

• Length: 2 m
• Cable category: Cat6 (SF/UTP, S-FTP)
• Conductor: AWG 26/7 stranded
• Construction: 4 pairs, PIMF (pair in metal foil) with overall braid/screen
• Connectors: RJ-45 straight male to RJ-45 straight male, copper-plated contacts, 1:1 assignment
• Data rate: Fast Ethernet up to 100 Mbit/s
• Sheath material: LSHF / LSOH (halogen-free)
• Small bending radius capability (down to approx. 10 mm)
• Short cable boot for space-constrained installations

How to use

Insert one RJ-45 plug into the network port of the switch, router, patch panel or terminal device and the other plug into the corresponding port at the other end of the link. Ensure that connected shielded equipment and cabling are properly grounded to benefit from the S/FTP shielding. The cable is plug-and-play and requires no additional configuration for Fast Ethernet links up to 100 Mbit/s. Route the cable without exceeding the recommended bending radius near tight corners to maintain performance.

Usage recommendations

For optimum performance, use the Ultraflex500 patch cord in shielded installations where grounding is implemented. Avoid sharp bends and excessive tensile stress during installation. If used in mixed shielded/unshielded environments, verify connector and equipment compatibility. The cable is suitable for frequent reconnections and limited-space routing, but long horizontal runs should use permanent installation cabling rated for longer distances and higher categories where required.