Wire connector MetzConnect BTR 130863-E straight connector for AWG 22/1, multicolour, 1 pc

MetzConnect BTR 130863-E is a straight wire connector engineered for AWG 22/1 conductors, supplied as a single multicolour unit. It provides a compact mechanical and electrical coupling solution for low-voltage wiring and signal cabling where AWG 22/1 termination is required. The connector supports cable feed from one or two sides and allows splitting an 8-wire data cable into two 4-wire cables when necessary. Built with a fully shielded metal housing, the product includes strain relief and a captive 360° shield connection to maintain shielding continuity in installations.

Advantages

The fully shielded metal housing ensures electromagnetic compatibility and reduces interference in data and signal lines. Support for AWG 26/1 to AWG 22/1 solid conductors makes the connector versatile for a range of cable types up to Cat.7A when used in appropriate combinations. Cable feed from one or two sides and the option to share an 8-wire cable into two 4-wire outputs add installation flexibility. Two bore holes for wall mounting and an integrated strain relief simplify permanent installation and mechanical fixation.

Suitable for

• Connecting or extending low-voltage data and signal cables up to Cat.7A
• Field terminations with AWG 26/1 to AWG 22/1 solid conductors
• Situations requiring cable splitting (one 8-wire into two 4-wire runs)
• Shielded installations where a continuous 360° shield connection is required
• Wall-mounted or panel-mounted wiring with mechanical fixation

Key specifications

• Type: straight wire connector
• Supported conductor sizes: AWG 26/1 to AWG 22/1 (solid wire)
• Colour: multicolour
• Quantity: 1 piece per pack
• Shielding: fully shielded metal housing with 360° captive shield connection
• Cable feed: from one or two sides
• Cable splitting: supports splitting 8-wire cable into two 4-wire cables (requires cable ties)
• Mounting: 2 bore holes for wall mounting
• Standards compatibility: suitable for use with Cat.6 / Cat.6A / Cat.7 / Cat.7A configurations (class E to ISO/IEC 11801 Ed.2.2:2011-06 in combination with Cat.6, Cat.6A, Cat.7 and Cat.7A cables and Cat.6 connectors)

How to use

Strip the solid conductors to the manufacturer’s recommended length and insert wires into the connector according to the wiring scheme required. Secure the cable in the strain relief and ensure the shield is engaged with the captive 360° connection to maintain continuity. If splitting an 8-wire cable into two 4-wire runs, position and secure the separations with cable ties at input and output sides as specified. Mount the connector to a stable surface via the two bore holes if a fixed installation is required. Verify electrical continuity and shielding after installation before applying operational signals.

Usage recommendations

Use solid conductors within the specified AWG range and follow local installation standards. Combine the connector with compatible Cat.6 or higher category cables and matching connectors to achieve the declared class E performance where applicable. Ensure proper shielding connection and strain relief to preserve signal integrity in shielded environments.