Wall mount bracket MikroTik OEM 06.001 for Ø38 mm poles, length 110 mm

Metal wall mount bracket MikroTik OEM 06.001 for Ø38 mm poles, length 110 mm is a compact mounting accessory intended to secure antennas, small radios and compatible network devices to walls using a pole interface. The bracket is made of metal for stable support and is designed to accept a Ø38 mm pole, extending 110 mm from the wall to provide clearance for equipment and cabling. It is suitable for indoor and outdoor environments where a robust, pole-compatible wall attachment is needed.

Advantages

The bracket’s metal construction ensures reliable mechanical support and resistance to common installation stresses. Its tailored fit for Ø38 mm poles simplifies attachment of standard pole-mounted devices and reduces the need for adapters. With a 110 mm length, the bracket balances compactness and sufficient offset to avoid wall interference while keeping the mounted equipment accessible for maintenance.

Suitable for

• Mounting small outdoor antennas and radio units on walls using a Ø38 mm pole
• Securing compact PoE radios or access points where pole mounting is required
• Indoor installations that require a pole-mounted attachment point with minimal projection
• Temporary or permanent setups where a corrosion-resistant metal bracket is preferred

Key specifications

• Material: metal construction for structural support
• Pole diameter compatibility: Ø38 mm
• Length (projection from wall): 110 mm
• Intended use: wall-to-pole mounting interface for antennas and small network devices
• Environment: suitable for indoor and outdoor installations

How to use

Install the bracket on a suitably rated wall surface using appropriate fasteners for the wall material (anchors or bolts not included). Secure the Ø38 mm pole into the bracket and tighten any provided clamps or bolts to ensure a firm connection. Mount the antenna or device onto the pole according to the device manufacturer’s instructions, route cables along the pole and wall to protect them from strain, and verify all mechanical connections are tightened and weatherproofed where necessary for outdoor installations.

Usage recommendations

Before installation, confirm wall material and load capacity to select correct anchors. For outdoor use, apply corrosion protection to exposed metal fasteners and seal cable entry points to prevent water ingress. Periodically inspect mounting hardware and retighten as part of routine maintenance.