Garden Extension Cable MONTIS MT080-30 — 30 m, 2×1.0 mm²

MONTIS MT080-30 — 30 m, 2×1.0 mm² is a garden extension cable intended to provide a safe and flexible supply of mains power outdoors. With a total length of 30 metres and two conductors of 1.0 mm² cross-section, this cable extends the reach of outdoor electrical appliances such as lawn mowers, hedge trimmers, lighting and seasonal equipment while maintaining compact conductor dimensions suitable for light to medium loads. The cable is designed for general outdoor use, offering a practical solution where a long lead is required.

Advantages

The construction balances length and manageability, enabling operation at a 30 m distance without excessive bulk. Two 1.0 mm² conductors are appropriate for many common garden tools and lighting circuits, and the insulated sheath provides mechanical protection and basic weather resistance for outdoor conditions. The cable’s flexible design facilitates coiling, storage and routing around garden obstacles, reducing handling effort compared with heavier cable types.

Suitable for

• Extending power to lawn mowers and grass trimmers
• Connecting outdoor lighting and decorative lights
• Powering small electric garden tools (leaf blowers, small chainsaws)
• Temporary power for seasonal outdoor equipment and events

Key specifications

• Cable length: 30 m
• Conductor configuration: 2 cores
• Conductor cross-section: 1.0 mm² per core
• Application: outdoor/garden extension lead for mains-powered tools and lighting
• Mechanical characteristics: flexible sheath for easier handling and coiling

How to use

Uncoil the cable fully before use to minimise heat build-up during operation. Connect the cable to a properly rated outdoor socket or extension outlet with suitable protection (RCD/ground-fault device where required). Route the cable along safe paths, avoiding pinch points, sharp edges and concentrated exposure to water. When powering tools, observe the rated current limits of the connected appliance; for longer runtimes or higher-power devices, select an appropriately sized cable. After use, disconnect from the supply, wipe dry if necessary and store coiled in a dry, shaded location.

Usage recommendations

For safe operation, use the cable with tools and fixtures whose current draw is within the capacity of 2×1.0 mm² conductors, avoid permanent underground burial, and inspect the sheath and conductors for damage before each use. Use residual-current protection for outdoor circuits and replace the cable if any damage or significant wear is found.