This product page focuses on theMOREK QuickBar Fork Busbar, 2-pole, 10mm² cross-section, type E, 12 modules length. It is compared against similar alternative busbars from the same MOREK series, featuring different numbers of poles, module lengths, terminal designs, and cross-sections. All compared items are designed for efficient electrical distribution in modular switchgear, but differ in electrical capacity and physical dimensions.
⚙️ The specification comparison covers key technical parameters: number of poles, conductor cross-sectional area, contact type, total length in modules, and busbar type (fork or pin), which determine compatibility with various modular devices.
| Parameter | MOREK QuickBar Fork Busbar, 2-pole, 10mm², 12M | MOREK QuickBar MEF20610A00 (2-Pole, 6 Modules) | MOREK QuickBar MEF41210N00 (4-Pole, 12 Modules) | MOREK QuickBar MEF30910A00 (3-Pole, 9 Modules) | MOREK QuickBar MEP10610A00 (1-Pole, 6 Modules, Pin) | MOREK QuickBar MEF41216N01 (4-Pole, 16mm², 12 Modules) | Practical Significance |
|---|
| Busbar Type | Fork | Fork | Fork | Fork | Pin | Fork | Fork busbars provide secure screw terminals, while pin versions suit different terminal types. |
| Number of Poles | 2-Pole | 2-Pole | 4-Pole | 3-Pole | 1-Pole | 4-Pole | Determines phase count for connected equipment (single-phase, two-phase, three-phase, or four-phase networks). |
| Cross-Section | 10 mm² | 10 mm² | 10 mm² | 10 mm² | 10 mm² | 16 mm² | A 16 mm² cross-section supports higher current loads compared to 10 mm². |
| Length in Modules | 12 Modules | 6 Modules | 12 Modules | 9 Modules | 6 Modules | 12 Modules | Defines the number of connectable modular devices in a single distribution board row. |
◎ Analyzing usage scenarios helps select the right model based on distribution board configuration, circuit breaker phase requirements, and current load demands in a specific project.
| Use Case | Recommended Product | Why |
|---|
| Installing two-phase or two-pole lines across 12 modules | MOREK QuickBar Fork Busbar, 2-pole, 10mm², 12M | Ideally matched in length and pole count for compact two-pole setups without wasted capacity. |
| Compact two-pole distribution for fewer devices | MOREK QuickBar MEF20610A00 (2-Pole, 6 Modules) | Reduced length of 6 modules suits smaller electrical enclosures with limited space. |
| Three-phase power distribution across 9 modules | MOREK QuickBar MEF30910A00 (3-Pole, 9 Modules) | Accommodates three-phase device groups requiring a non-standard 9-module row width. |
| Four-phase power distribution with high current load | MOREK QuickBar MEF41216N01 (4-Pole, 16mm², 12 Modules) | The upgraded 16 mm² cross-section safely handles heavier electrical loads in four-pole setups. |
The main advantage of this 2-pole fork busbar with a 12-module length and 10 mm² cross-section is the ideal balance for two-pole modular device layouts within a standard 12-module span. Choose this product if you need a reliable distribution link for a two-pole setup of this size. If your setup requires three-phase power, higher current capacity, or a different module count, select the alternative model matching those specific electrical requirements.
