Sprayable Dimafix Adhesive 400 ml — Motip AN-17938 for 3D Print Bed Fixing

Motip Dimafix Sprayable Adhesive in a 400 ml aerosol is formulated to improve first-layer adhesion for 3D printing on a variety of build plates. The spray creates a temporary tacky layer that holds parts firmly during printing and allows easy release after the bed and print cool. Designed for use with common filaments, this adhesive supports consistent first layers and reduces warping and lifting without altering printer hardware.

Advantages

The sprayable formula applies evenly and dries quickly, producing a uniform adhesion surface for better print reliability. It provides a temporary bond that maintains strength during the print cycle and releases cleanly once the temperature drops. The aerosol format delivers controlled dosing for repeatable coverage and reduces the need for mechanical bed modifications or specialized surfaces.

Suitable for

• Improving first-layer adhesion for PLA, ABS, PETG and other common filaments
• Home hobbyist and small workshop prototyping
• Large flat parts prone to warping or corner lifting
• Temporary fixation when printing multiple parts on a single build plate

Key specifications

• Form: aerosol spray, 400 ml capacity
• Function: temporary adhesive layer for 3D print beds
• Compatibility: suitable for most thermoplastic filaments used in fused filament fabrication
• Application surface: flat build plates and print beds
• Performance: quick-drying, provides strong hold during heating and clean release after cooling

How to use

Shake the can well before use. With the build plate clean and cool, apply a light, even spray from a distance of 20–30 cm across the intended printing area. Allow the coating to dry briefly before heating the bed to the required printing temperature. After printing, let the bed cool to facilitate part removal; residual adhesive can be removed with a mild solvent or isopropyl alcohol if necessary. Follow standard safety precautions for aerosol products and ensure adequate ventilation during application.

Usage recommendations

Apply a thin, even layer rather than heavy coats to avoid buildup; test a small area when switching filament types. Use on glass or metal plates for consistent results and clean the surface periodically to maintain adhesion performance.