Car polisher accessory pad NEO tools 08-980 — polishing sponge pad 150×150×25 mm, hard, 1 pc

NEO tools 08-980 is a hard-density polishing sponge pad sized 150 × 150 × 25 mm, intended as a replacement accessory for car polishers. Made from durable polyurethane foam, the pad is suitable for medium-to-heavy cutting and smoothing after aggressive polishing, and is supplied as a single unit weighing approximately 20 g. It is compatible with rotary and dual-action polishers and designed for a maximum rotational speed of 3,000 rpm.

Advantages

The pad’s hard polyurethane foam construction provides good durability and consistent cutting performance for leveling paint defects and working with polishing pastes. Its Velcro backing allows fast attachment and replacement on polishers, and the 150 × 150 × 25 mm size offers a balance between surface coverage and control during detailing tasks.

Suitable for

• Removing medium-to-heavy paint defects and sanding marks
• Leveling and smoothing surfaces after aggressive polishing
• Applying polishing compounds and sealants on automotive paint
• Use with rotary or dual-action polishers for controlled cutting

When it may not be suitable

This hard-density pad is not ideal for delicate or soft finishes where light polishing or final finishing is required, since it provides more aggressive cutting action. It may also be too firm for small, intricate areas where a softer, smaller pad would give better conformity and reduced risk of introducing swirl marks.

Key specifications

• Material: polyurethane foam (hard density)
• Dimensions: 150 × 150 × 25 mm
• Intended use: medium-to-heavy cutting, smoothing after aggressive polishing
• Compatible tool types: rotary and dual-action polishers
• Maximum operating speed: 3,000 rpm
• Attachment: Velcro (hook-and-loop)

How to use

Attach the pad to a polisher using the Velcro backing, ensuring it is centered and securely fixed. Select an appropriate polishing compound for the task and start at low-to-moderate speed, gradually increasing as needed but not exceeding the recommended maximum speed. Work the pad in overlapping passes, keeping the polisher moving to avoid heat build-up and local paint damage. After use, clean the pad of residues according to the polish manufacturer’s instructions and store it dry.

What to consider before purchase

• Required cutting aggressiveness — hard pad for medium-to-heavy defects
• Compatibility with your polisher type and Velcro backing size
• Maximum speed rating (3,000 rpm) relative to your tool’s operating speed
• Surface sensitivity — not recommended for delicate or very soft paint finishes

Usage recommendations

Use with appropriate polishing compounds and start at lower speeds to test cutting action. For finishing passes, switch to a softer pad to refine gloss and reduce risk of swirl marks.