Anti-slip Tape No name 50 mm x 5 m, yellow-black, self-adhesive safety tape

Anti-slip Tape No name 50 mm x 5 m, yellow-black, self-adhesive safety tape provides a coarse-grit surface combined with an adhesive backing to reduce the risk of slipping on stairs, ramps, walkways and other slippery surfaces. The tape is 50 mm wide and 5 metres long, with a high-contrast yellow and black pattern suitable for visual hazard marking as well as improving traction. It is intended for use on clean, dry substrates and can be applied in both indoor and outdoor environments where enhanced grip and clear safety delineation are required.

Advantages

This self-adhesive safety tape offers immediate slip resistance through its textured grit surface while the strong adhesive backing enables quick application without mechanical fasteners. The yellow-black colouring provides clear visual contrast for hazard identification, helping to alert pedestrians to potential slip zones. The tape is flexible enough to conform to slightly uneven surfaces and durable for regular foot traffic.

Suitable for

• Stair treads and nosings
• Indoor and outdoor ramps
• Walkways, corridors and loading areas
• Workshops, warehouses and public access areas

Key specifications

• Width: 50 mm
• Length: 5 m
• Surface: coarse grit for slip resistance
• Backing: self-adhesive layer for direct application
• Colour: yellow and black high-contrast pattern
• Intended use: indoor and outdoor anti-slip and hazard marking

How to use

Ensure the surface is clean, dry and free of dust, oil, loose paint or other contaminants before applying the tape. Measure and cut the required length, peel off the backing and press the tape firmly onto the substrate, smoothing from one edge to the other to remove air pockets. Apply firm pressure along the length and edges to secure adhesion. For high-traffic areas, allow the adhesive to set according to ambient conditions and avoid heavy use for a short period after installation.

Usage recommendations

For best performance, apply at temperatures above 10°C on stable, non-porous or primed porous surfaces. Replace any sections that become worn, lifted or damaged to maintain slip resistance and visual clarity. When used outdoors, periodic inspection is recommended to check for loss of adhesion or surface wear caused by weather and traffic.