Expansion sleeve anchor KM-M10X80*P4 no name – M10 × 80 mm metal anchor bolt

Expansion sleeve anchor KM-M10X80*P4 is a metal mechanical anchor designed for secure fastening in concrete and natural stone. The anchor features an M10 threaded bolt and an overall length of 80 mm. Installation relies on radial expansion of the sleeve inside a drilled hole to create a frictional and mechanical hold suitable for both structural and non-structural applications. The product is intended for fixed attachments where a reliable metal anchor bolt is required.

Advantages

This metal anchor bolt offers a compact design with a simple installation principle based on sleeve expansion, providing consistent load transfer to the base material. Its M10 thread size enables compatibility with standard nuts and fixtures. The 80 mm length balances embedment depth and protruding thread, allowing versatile use for mounting brackets, rails, and fixtures. Made of metal, the anchor is suitable for heavy-duty loads in concrete and stone when installed according to recommended drill diameters and embedment depths.

Suitable for

• Mounting brackets to concrete walls
• Securing rails, handrails and supports
• Fixing machinery bases and supports
• Attaching fixtures such as shelves, signs, and cable trays

Key specifications

• Thread size: M10
• Overall length: 80 mm
• Material: metal sleeve and bolt
• Anchor type: mechanical expansion sleeve
• Suitable base materials: concrete and natural stone

How to use

Drill a hole in the base material to the manufacturer’s recommended diameter and depth for an M10 expansion sleeve anchor, ensuring the hole is clean and free of dust. Insert the anchor into the hole until the sleeve sits flush with the surface. Place the fixture over the protruding thread, add the nut and washer if required, and tighten to the specified torque to expand the sleeve and set the anchor. Verify that the sleeve has expanded and that the connection is secure before applying service loads.

Usage recommendations

Check base material condition and follow recommended drill diameter and embedment depth for M10 expansion anchors. Use appropriate torque values and corrosion-resistant washers or nuts if required by the environment. Avoid use in hollow or significantly cracked substrates unless designed for such conditions and approved by a structural engineer.