TP-Link Smart Switch Module

TP-Link Smart Switch Module is a compact switching actuator with 7 channels designed for AC-powered installations. It operates at 2400 MHz for wireless functions and supports an input frequency of 50/60 Hz. The module has a maximum switching capacity of 150 W per channel and a small form factor—approximately 44.7 mm wide, 40.7 mm deep and 16.1 mm high—suitable for installation inside standard European mounting boxes or close to fixtures.

Advantages

The smart switch module combines multi-channel control and energy monitoring in a single device, allowing separate automation and measurement for connected loads. Dual operating modes enable both roller shutter control and standard switch operation without replacing existing wiring. Built-in protections, including zero-crossing protection and relay failure detection, extend service life and provide diagnostic alerts. Instant Bluetooth control and wide platform compatibility ensure local setup and integration with popular smart-home ecosystems.

Suitable for

• Automating roller shutters and shades
• Controlling two lights or outlets independently
• Adding remote or voice control to existing fixtures
• Integrating energy monitoring for individual circuits

Key specifications

• Type: Switching actuator with 7 channels
• Wireless frequency: 2400 MHz
• Power source: AC
• Maximum switching capacity: 150 W per channel
• Input frequency: 50/60 Hz
• Dimensions (W × D × H): approx. 44.7 × 40.7 × 16.1 mm
• Package dimensions (W × D × H): 48 × 65 × 25 mm

How to use

Install the module in an appropriate electrical junction box near the load or behind an existing switch, following local electrical codes and switching off power before wiring. Select the desired operating mode—roller mode for shade/roller shutter control or switch mode for lights and outlets—using the device configuration in the companion app. Pair the module via Bluetooth for initial setup, then connect to the network through the app for full remote operation and platform integration. Configure channels, schedules and energy-monitoring parameters in the app to match the loads and usage patterns.

Usage recommendations

Use the module with loads that do not exceed the stated maximum switching capacity and verify wiring compatibility before installation. Enable energy monitoring per channel to track consumption trends and create schedules that shift high-demand devices to off-peak periods. For roller applications, enable obstacle detection and test end-stop calibration after installation. If unsure about wiring or local regulations, use a qualified electrician for installation.