EE Odlewnia Trójnik 1″x3/4″x3/4″ czarny nr 25, waga 0.219kg

EE Odlewnia Trójnik 1″x3/4″x3/4″ czarny nr 25 is a cast reducing tee designed for fluid or gas distribution in piping systems where a 1" inlet reduces to two 3/4" outlets. The component is finished in black and has a mass of approximately 0.219 kg. It is intended for use in installations that require a robust cast fitting to branch a single larger pipe into two smaller lines with a stable mechanical connection.

Advantages

The cast construction provides mechanical strength and durability under typical installation stresses. The reducing tee shape allows a smooth transition from a 1" main run to two 3/4" branches, simplifying system layout and minimizing additional adapters. Its compact weight and standardized dimensions make it compatible with common threaded piping and fittings in residential and light commercial systems.

Suitable for

• Plumbing systems that require branching from a 1" main to two 3/4" outlets
• Low- to medium-pressure water or non-aggressive fluid distribution
• Repair or modification of existing threaded piping networks

When it may not be suitable

This reducing tee is not suitable for applications requiring corrosion resistance to aggressive chemicals or for use in high-temperature steam systems unless the material specifications are verified for those conditions. It may also be inappropriate where welded or seamless fittings are required for higher pressure ratings or where a different connection type (e.g., soldered, welded, or push-fit) is mandated.

Key specifications

• Connection sizes: 1" inlet reduced to two 3/4" outlets
• Material: cast fitting (black finish)
• Weight: approximately 0.219 kg
• Function: reducing tee for branching a single line into two smaller lines

How to use

Prepare mating pipe threads by cleaning and, where appropriate, applying suitable thread sealant or tape rated for the intended fluid and pressure. Thread the tee into the 1" main line and attach the two 3/4" branch lines, hand-tightening first and then using a wrench to secure without over-torquing. After installation, pressure-test the system according to applicable codes and check for leaks at all threaded joints.

What to consider before purchase

• Verify compatibility of the 1" and 3/4" threaded connections with your existing piping standard (thread type and pitch)
• Confirm material suitability for the fluid type, temperature, and operating pressure
• Ensure the black finish meets aesthetic or protective requirements for your installation

Usage recommendations

Use appropriate sealing materials for threaded joints and follow local plumbing codes for pressure testing. Avoid excessive torque when tightening and inspect periodically for signs of wear or corrosion in service.