Wire guide 7×7 mm, length 1 m – OEM

Wire guide 7×7 mm, length 1 m – OEM is a rigid cable conduit with an internal cross-section of 7×7 mm and a total length of 1 meter, designed for routing and protecting small cables and wires in installations, machinery and furniture. The compact rectangular profile keeps individual conductors aligned, reduces friction against surrounding surfaces and provides a neat routing channel when space is limited. The conduit is intended for mechanical protection and guiding of electrical, data and control wiring where a slim, stable route is required.

Advantages

The rigid profile maintains cable position and prevents bending or kinking inside the run. Its compact 7×7 mm internal cross-section accommodates small-diameter cables and multiconductor leads while minimizing occupied space. The smooth inner surface reduces abrasion and makes cable insertion easier. As an OEM-style component, the guide integrates with enclosed installations and fitted assemblies without adding significant bulk or weight.

Suitable for

• Routing low-voltage electrical wiring in furniture or cabinets
• Protecting data and signal cables in control panels and machinery
• Guiding harnesses and small multicore cables in appliances
• Tidy cable management in tight or shallow installation spaces

Key specifications

• Internal cross-section: 7×7 mm
• Total length: 1 meter
• Profile type: rigid rectangular conduit
• Internal surface: smooth to reduce abrasion
• Recommended cable size: small-diameter single conductors and small multicore assemblies

How to use

Select an appropriate routing path and fix the conduit in place using clamps or fasteners suited to the installation substrate. Feed individual cables or pre-assembled harnesses through the conduit from one end to the other; for long continuous runs ensure the conduit is supported at regular intervals to prevent sagging. If necessary, trim the conduit to length with a fine-toothed saw and deburr the cut edges before inserting cables to avoid damage to insulation.

Usage recommendations

Do not use this conduit for high-voltage power distribution or for applications requiring continuous thermal resistance beyond normal ambient conditions. Ensure cables routed through the guide comply with applicable electrical standards and that mechanical fastenings do not compress or deform the conduit.