Wireless Microphone Receiver Desktop Omnitronic 13061092

Ethernet LAN: An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.

No

Antenna type: Type of antenna, also known an aerial, e.g. external, internal.

Removable

Built-in display: A display which is part of the product, so you do not need to attach another display.

Yes

6.35 mm (1⁄4-inch) output:

1

Microphone frequency response:

40 - 18000

Switching bandwidth:

24 MHz

Operating frequency type:

Ultra High Frequency (UHF)

Other features

Weight: Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.

1.33 kg

Channels quantity: The number of channels the device has. There can be an individual input or output for each channel.

1 channels

Packaging data

Package weight: Weight of the packaged product.

1650 g

Package height: The distance from the top to the bottom of the packaging.

95 mm

Package depth: The distance from the front to the back of the packaging.

230 mm

Package width: The distance from one side of the packaging to the other.

290 mm

Weight & dimensions

Height: The measurement of the product from head to foot or from base to top.

40 mm

Depth: The distance from the front to the back of something.

150 mm

Width: The measurement or extent of something from side to side.

213 mm

Power

Power supply type: The type of power supply which this product uses.

AC

Input voltage: The voltage (V) which is required to power the product.

100 - 240

Amplifier

Total Harmonic Distortion (THD): Total harmonic distortion is a measure of non-linear harmonic distortion and is given in %. Non-linear harmonic distortions are signals which were not present in the original before the signal was converted by the headphones. These unwanted signals are caused by the diaphragm, whose movements do not precisely move in time with the electric signals that cause it to move. Unfortunately, this is a feature of all electroacoustic transducers. Although it cannot be completely eliminated, suitable steps can be taken to minimise it. However, the user is not interested in why this distortion takes place but in how great the level of distortion must be for it to become perceptible. According to the findings of several research projects, a total harmonic distortion of 1% in the frequency range of 100 to 2000 Hz is imperceptible. Below 100 Hz, the perceptibility threshold lies at 10%.

0.6 %

Receiver

Signal-to-Noise Ratio (SNR): This is the ratio of signal intensity to noise intensity.

105 dB

Performance

Mounting type: Type of mounting e.g. wall mounting.

Desktop

Ports & interfaces

Operating frequency: The rate at which an electrical current alternates, usually measured in Hertz (Hz). Also the way to note a general location on the radio frequency spectrum such as 800 MHz, 900 MHz or 1900 MHz.

740 - 764

XLR out:

1