-
Weight:
Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
-
9 kg
-
Power consumption (typical):
Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
-
240 W
-
Package weight:
Weight of the packaged product.
-
10800 g
-
Height:
The measurement of the product from head to foot or from base to top.
-
89 mm
-
Signal-to-Noise Ratio (SNR):
This is the ratio of signal intensity to noise intensity.
-
85 dB
-
Width:
The measurement or extent of something from side to side.
-
483 mm
-
Depth:
The distance from the front to the back of something.
-
400 mm
-
Connectivity technology:
The technology that enables connectivity of the device, e.g. wired or wireless.
-
Wired
-
Product colour:
The colour e.g. red, blue, green, black, white.
-
Black
-
Equalizer:
Device that attempts to reverse the distortion incurred by a signal transmitted through a channel.
-
Yes
-
Impedance:
The effective resistance of an electric circuit or component to alternating current, arising from the combined effects of ohmic resistance and reactance.
-
16 Ω
-
Microphone in:
The socket where a microphone is connected to the device.
-
Yes
-
Total Harmonic Distortion (THD):
Total harmonic distortion is a measure of non-linear harmonic
distortion and is given in %. Non-linear harmonic distortions are
signals which were not present in the original before the signal was
converted by the headphones. These unwanted signals are caused by the
diaphragm, whose movements do not precisely move in time with the
electric signals that cause it to move. Unfortunately, this is a
feature of all electroacoustic transducers. Although it cannot be
completely eliminated, suitable steps can be taken to minimise it.
However, the user is not interested in why this distortion takes place
but in how great the level of distortion must be for it to become
perceptible. According to the findings of several research projects, a
total harmonic distortion of 1% in the frequency range of 100 to 2000
Hz is imperceptible. Below 100 Hz, the perceptibility threshold lies
at 10%.
-
0.5 %
-
Purpose:
What the product is used for.
-
Performance/stage
-
Package depth:
The distance from the front to the back of the packaging.
-
480 mm
-
Package height:
The distance from the top to the bottom of the packaging.
-
180 mm
-
Package width:
The distance from one side of the packaging to the other.
-
950 mm
-
Frequency range:
The lowest and the hightest frequencies that can be inputted/produced.
-
80 - 14000
-
Cooling type:
The method used to cool the device or to cool the air around the device.
-
Active
-
Line inputs (RCA):
-
3
-
AC input frequency:
-
50
-
AC input voltage:
The voltage of the AC electricity that is inputted into the product.
-
230
-
RMS power output per channel (1 Ohm):
-
120 W
-
Peak power per channel:
The maximum power (usually measued in watts) that can be transmitted through a channel.
-
120 W
-
Amplifier class:
An electronic amplifier, amplifier, or (informally) amp is an electronic device that increases the power of a signal. It does this by taking energy from a power supply and controlling the output to match the input signal shape but with a larger amplitude. Power amplifier circuits (output stages) are classified as A, B, A/B and C for analog designs, and class D and E for switching designs based on the proportion of each input cycle (conduction angle), during which an amplifying device is passing current.
-
A/B
-
Line outputs (RCA):
-
1
