Mounting Bracket Double 20–22 mm with Screw and Anchor Onnline A-690678

Mounting Bracket Double 20–22 mm with Screw and Anchor by Onnline A-690678 is a wall-mounted clamp designed to secure two parallel cylindrical elements with diameters between 20 and 22 mm. Supplied with a matching screw and wall anchor, this double bracket provides a fixed support point for pipes, rods or similar tubular components where a compact, rigid attachment is required.

Advantages

The bracket is made to hold two tubes in parallel with a defined spacing and consistent alignment. Inclusion of a screw and wall anchor simplifies installation and ensures a secure connection to masonry or other solid surfaces. The clamp design offers stable lateral support and helps reduce rotation or displacement of the secured elements. Its dimensions specifically fit 20–22 mm tubing, reducing the need for additional adapters or spacers.

Suitable for

• Securing plumbing pipes with 20–22 mm diameter
• Mounting curtain rods, handrails or guide rods of matching size
• Routing electrical conduits or cable bundles with compatible tubing
• Light mechanical fixtures where two parallel tubes must be held rigidly

Key specifications

• Clamping diameter range: 20–22 mm for each tube
• Configuration: double parallel clamp for two cylindrical elements
• Included fasteners: one screw and one wall anchor for mounting to solid substrates
• Mounting type: fixed wall attachment
• Typical materials: corrosion-resistant metal or durable polymer (material depends on specific batch)

How to use

Measure the tubing diameter to confirm compatibility within the 20–22 mm range and mark the desired mounting position on the wall. Drill a hole suitable for the included wall anchor, insert the anchor, position the bracket over the tubing and align it with the anchor, and fasten the screw until the bracket is securely fixed to the wall. Insert the two tubes into the clamp openings and verify they sit evenly and are held without excessive play. Adjust tube position before fully tightening if necessary.

Usage recommendations

Use the bracket on appropriately rated surfaces such as concrete, brick or solid timber; avoid mounting on weak or hollow substrates without appropriate anchors. For exterior or humid environments, confirm the bracket material and fasteners are corrosion-resistant. Do not exceed the mechanical load typical for light fixtures and piping applications; distribute loads across multiple supports for longer runs.