Switch ORNO OR-OE-7102/W stair switch surface-mounted AQUATIC IP44 white

Surface-mounted stair switch ORNO OR-OE-7102/W from the AQUATIC series is a compact, moisture-resistant on/off device intended for controlling stairway and corridor lighting. The unit is finished in white and designed for surface installation where recessed mounting is impractical. With IP44 protection, the switch is suitable for environments exposed to splashes or light moisture while providing simple manual control of luminaires in residential and light-commercial settings.

Advantages

The ORNO AQUATIC stair switch combines a compact surface-mounted design with IP44 ingress protection, allowing safe installation in damp or splash-prone locations. Its simple on/off functionality makes it easy to operate and maintain, and the white finish integrates discreetly with common interior surfaces. The device is designed for basic reliability and straightforward wiring for typical stair and corridor lighting circuits.

Suitable for

• Staircase lighting control in residential buildings
• Corridor or hallway lighting in apartments and small offices
• Surface-mounted installations where recessed boxes are not available
• Locations with occasional splashes or higher humidity, such as entryways and utility rooms

Key specifications

• Mounting: surface-mounted
• Function: single-pole on/off stair switch
• Protection rating: IP44 (splash and moisture resistant)
• Finish/color: white
• Intended environment: indoor use in damp-prone areas

How to use

Install the switch on a flat wall surface using appropriate screws and anchors for the substrate. Connect the live and switched live conductors according to local wiring regulations and ensure the circuit is de-energized during installation. After wiring, secure the cover and test the switch by turning lighting on and off to confirm proper function. Use the device only within its rated protection environment and intended single-pole switching application.

Usage recommendations

For reliable performance, mount the switch at a convenient height for users and away from direct water jets. Verify compatibility with the connected luminaires and the building's electrical standards. Periodically inspect the exterior for damage and replace the unit if the enclosure or actuator shows signs of wear that could compromise moisture protection.