Wall-mounted electrical switch Ospel ŁP-2A/00 — 10 A, 250 V, IP20, 82×82×36 mm, white

Ospel ŁP-2A/00 is a single-pole wall-mounted electrical switch intended for residential and light-commercial electrical installations. Rated for 250 V AC and a nominal current of 10 A (10AX), the device provides a compact switching solution with IP20 protection and dimensions of 82×82×36 mm. Finished in white, the switch is designed to fit standard European wall boxes and to control lighting circuits and low-power appliances using screw terminal connections.

Advantages

The switch combines a compact footprint with a conventional mechanical rocker for reliable manual operation. Its 10 A rating with 10AX switching capability supports resistive and inductive loads typical for domestic lighting and small appliances. IP20 protection makes it suitable for indoor installation, while the white finish offers straightforward integration into common interior schemes. Screw terminals enable secure wiring and straightforward installation for electricians and experienced DIY users.

Suitable for

• Controlling indoor lighting circuits in homes and apartments
• Switching small, low-power appliances up to the specified rating
• Replacement of standard single-pole wall switches in existing installations
• Use in corridors, bedrooms, kitchens and utility rooms where IP20 is acceptable

Key specifications

• Rated voltage: 250 V AC
• Nominal current: 10 A (10AX)
• Approximate maximum switching power: up to 2 200 W (depending on load type)
• Protection rating: IP20 (suitable for indoor use)
• Mounting type: wall-mounted, fits standard wall box dimensions
• Dimensions: 82 × 82 × 36 mm
• Wiring: screw terminal connections
• Color/finish: white

How to use

Before installation, switch off the relevant circuit at the distribution board and verify absence of voltage. Remove the existing cover plate if replacing a switch, then connect live and switched live conductors to the screw terminals following local wiring standards and polarity. Secure the device to the wall box and attach the cover plate. After restoration of power, test the switch operation to confirm correct switching of the lighting or appliance. If unsure about wiring or local regulations, consult a qualified electrician.

Usage recommendations

Use this switch only indoors where IP20 protection is sufficient. Do not exceed the rated current and power; for inductive or motor loads consult load-specific guidance. Regularly inspect terminal screws for secure fastening and avoid exposure to moisture or corrosive environments.