Electrical switch Ospel ŁP-6A/00 White, 250 V AC, 10 A, IP20, 82×82×36 mm

Ospel ŁP-6A/00 White is a single-pole electrical wall switch designed for indoor residential and commercial installations. The switch is intended for control of lighting circuits and simple resistive or low-power inductive loads. It has a rated voltage of 250 V AC and a nominal current rating of 10 A, with IP20 protection for standard interior environments. The compact dimensions of 82×82×36 mm make it suitable for mounting in common flush boxes and its white finish integrates with conventional interior decors.

Advantages

The switch provides reliable manual control of lighting and basic loads with a clear rated current and voltage specification. Its compact size and standard mounting dimensions simplify replacement or new installations in existing walls. The IP20 rating suits protected indoor locations, and screw terminal connections ensure straightforward wiring and secure contact for typical electrical installations.

Suitable for

• Control of indoor lighting circuits in homes and apartments
• Basic on/off control for small fans or appliances within 10 A limit
• Commercial interiors such as offices, corridors, and service rooms
• Replacement of standard single-pole switches in flush wall boxes

Key specifications

• Rated voltage: 250 V AC
• Nominal current: 10 A (10 AX rating suitable for resistive and modest inductive loads)
• Protection class: IP20 (for indoor, dust-protected environments)
• Terminal type: screw terminals for fixed conductor connections
• Mounting dimensions: 82 × 82 × 36 mm suitable for standard flush mounting
• Color and finish: white

How to use

Before installation, ensure the circuit is de-energized at the breaker. Mount the switch in a standard flush wall box using the provided fixing points. Connect supply and load conductors to the screw terminals according to local wiring rules and the switch’s labeling, securing conductors tightly to avoid loose contacts. After wiring, restore power and test the switch function by toggling on and off to confirm proper operation. Use only within the specified voltage and current limits.

Usage recommendations

Install the switch in dry, indoor locations away from direct moisture. For loads that approach or exceed the 10 A rating, choose a switch or protection device with a higher current capacity. Periodically check terminal screws for tightness and inspect for signs of wear or overheating; replace the device if any damage is observed.